|
Oracle® Application Server Release Notes
10g Release 2 (10.1.2) for hp-ux Itanium B25195-02 |
|
 Previous |
 Next |
|
Oracle® Application Server Release Notes
10g Release 2 (10.1.2) for hp-ux Itanium B25195-02 |
|
|
Previous |
Next |
This chapter describes issues and workarounds related to Oracle Application Server Portal. It includes the following topics:
Section 8.1, "OracleAS Portal 10g Release 2 (10.1.4) Issues and Workarounds"
Section 8.2, "OracleAS Portal 10g Release 2 (10.1.2) Issues and Workarounds"
This section describes issues and workarounds related to OracleAS Portal 10g Release 2 (10.1.4). It includes the following topics:
Section 8.1.4, "Portlet and Provider Issues and Workarounds"
Section 8.1.5, "Globalization Support Issues and Workarounds"
This section describes general issues and their workarounds in OracleAS Portal. It includes the following topics:
Section 8.1.1.1, "Editing a Database Link Requires Password"
Section 8.1.1.2, "Moving Content When Approval Is Enabled Does Not Require Approval"
Section 8.1.1.3, "Download Fails for Files with .tgz, .gz, and .Z Extensions"
Section 8.1.1.4, "Logout Link Does Not Work When Accessing OracleAS Portal Using a Mobile Device"
Section 8.1.1.5, "Pushing Oracle Reports 10.1.2.0.2 Output to OracleAS Portal 10.1.4 Does Not Work"
If the database where the portal schema is installed is version 10.2 or later, then users must reenter the remote user's password when they rename or edit a database link from the Portal Navigator's Database Objects tab. This is applicable only for those database links that are created with the Specific User option.
Moving content between pages or between regions of the same page does not trigger approvals. For example, when a target page is configured with an approval process and a contributor moves content from a source page to the target page, the moved content does not trigger the approval process on the target page, even when approval is required for all users.
When you download documents with extensions .gz, .tgz, and .Z from OracleAS Portal, the download will fail.
As a workaround, perform the following steps:
Open the file, ORACLE_HOME/Apache/Apache/conf/httpd.conf.
Locate the Oracle HTTP Server AddEncoding directive.
Comment out the directives for the extensions with Z, gz, and tgz as shown in the following example:
# AddEncoding x-compress Z # AddEncoding x-gzip gz tgz
Run the following command to synchronize the manual configuration changes done on the Oracle Application Server middle tier:
ORACLE_HOME/dcm/bin/dcmctl updateConfig -ct ohs
Restart Oracle HTTP Server by running the following command:
ORACLE_HOME/opmn/bin/opmnctl restartproc process-type=HTTP_Server
Restart OracleAS Web Cache by running the following command:
ORACLE_HOME/opmn/bin/opmnctl restartproc process-type=WebCache
This issue will be fixed in a future patch release.
When you access OracleAS Portal using a mobile device and the default home page is public, logging out does not end the session immediately. Consequently, nonpublic content accessed within the session continues to be accessible in the browser. It remains accessible until you close the browser or the wireless session times out.
You can fix this issue by applying patch 4568672 for Wireless server. This patch is available at:
When OracleAS Portal 10g Release 2 (10.1.4) is used with Oracle Reports 10g Release 2 (10.1.2.0.2), you cannot push Oracle Reports output to OracleAS Portal.
For example, the following URL does not work as expected:
http://mywebserver.com:7779/reports/rwservlet?server=myrepserv+report=test.rdf+ userid=scott/tiger@mydb+destype=oracleportal+desformat=PDF+pagegroup=mypaggrp+ outputpage=reports_output+itemtitle=pushtoportal+statuspage=result
To resolve this issue, apply the Oracle Reports patch ARU 7769689.
If your portal manages content with multiple translations and you are logged in with the default language, then you may see the following error when you try to upload a file or image item:
Internal error (WWC-00006) Unexpected error - User-Defined Exception (WWC-35000) Unexpected error - ORA-00001: unique constraint PORTAL.WWDAV$PKPATH) violated (WWC-35000)
This error is displayed because another file or image item on the page has the same file name. As a workaround, perform any one of the following tasks:
Use a different file name for the new file or image item.
Run the DAV Loader utility (wwdav_loader), as described in the Oracle Application Server Portal Configuration Guide. Running DAV Loader can be very time consuming, however, this will enable you to upload the new file or image item without changing its file name.
If you configure an OracleAS Cold Failover Cluster (Middle Tier) that resides on the same node as the infrastructure associated with the middle tier from which the portal is running, then you may see the following error when you log in to OracleAS Portal:
Internal error (WWC-00006) Unexpected error encountered in wwsec_app_priv.process_signon (User-Defined Exception) (WWC-41417)
The Oracle Internet Directory host name in the Portal Dependency Settings file, iasconfig.xml, may incorrectly specify the host name of the new middle tier. As a workaround, perform the following steps:
Update the IASInstance element in the iasconfig.xml file so that the Host (of the IASInstance element associated with the Oracle Internet Directory component) is that of the Oracle Internet Directory host.
Run the ptlconfig tool to update the Oracle Internet Directory settings, as follows:
ptlconfig -dad <dad> -pw <portal schema password or Oracle Internet Directory password> -oid
For more information about updating the iasconfig.xml file and running ptlconfig, refer to Appendix A "Using the Portal Dependency Settings Tool and File" in the Oracle Application Server Portal Configuration Guide.
This section describes upgrade-related issues and their workarounds in OracleAS Portal.
When upgrading to OracleAS Portal 10g Release 2 (10.1.4), relative hypertext links to images and documents may be broken. This can occur when the relative hypertext link uses a different case than the file name. For example, if a pre-upgrade image was uploaded to your portal with the name PROCESS1.GIF, and a hypertext link is referring to process1.gif, after the upgrade, the relative hypertext link to the image will be broken. You are most likely to encounter this in HTML templates or in documents that refer to images or other documents.
To address this issue, edit image and document names, making their case agree with the case used for the file names.
This section describes issues and workarounds related to the OracleAS Portal user interface. It includes the following topic:
In a non-English portal, the following template caching option label is incorrect (Template Properties: Main tab):
The correct label for this template caching option is:
This section describes issues and workarounds related to OmniPortlet, Web Clipping, Simple Parameter Form, Page portlet, and WSRP providers. This section includes the following topics:
Section 8.1.4.1, "Using OmniPortlet Web Page Data Source After Cloning"
Section 8.1.4.3, "Download Latest Portlet Container for WSRP"
Section 8.1.4.4, "Using WSRP Portlets that Display User Profile Attributes within OracleAS Portal"
Section 8.1.4.5, "Registering WSRP Producers in Enterprise Configurations"
Section 8.1.4.6, "Issue Adding or Deleting Portlets on Page Portlets"
Section 8.1.4.7, "Issue When Accessing Page Portlet Using Federated Portal Adapter"
If you clone a middle-tier instance, then you must perform the following steps before you can use OmniPortlet Web Page Data Source:
Open the web.xml file.
ORACLE_HOME/j2ee/OC4J_Portal/applications/portalTools/omniPortlet/WEB-INF/web.xml
If the usePort context parameter is present, then set it to the Oracle HTTP Server port of the cloned target instance. This port number is specified in ORACLE_HOME/install/portlist.ini.
Restart the OC4J_Portal instance.
ORACLE_HOME/opmn/bin/opmnctl stopproc process-type=OC4J_Portal ORACLE_HOME/opmn/bin/opmnctl startproc process-type=OC4J_Portal
In an OracleAS Portal installation that has Secure Sockets Layer (SSL) throughout (see the Oracle Application Server Portal Configuration Guide, Section 6.3.2.1.4 "SSL Throughout OracleAS Portal"), the page portlet output is truncated and the portlet displays some junk characters in the following scenarios:
A page portlet that contains a tab is placed on a page whose definition is cached at the system level
The definition of a page portlet that contains a tab specifies system-level caching
An instance of a Page portlet that contains a tab specifies system-level caching
To avoid truncation and junk characters in a page portlet, specify user-level caching for the container page definition, the page portlet definition, and the page portlet instance.
This issue will be addressed in a future patch release. The patch will enable the use of system level caching in the presence of page portlets with tabs, without such errors.
After the release of OracleAS Portal 10.1.2.0.2, the portlet container for WSRP was updated and continues to be updated. Please review the PDK software download page for information on new versions of the container as well as any required patches that need to be applied before using it:
http://www.oracle.com/technology/products/ias/portal/pdk.html
When a user that has not yet been authenticated visits a publicly accessible page in OracleAS Portal, a temporary session is created using an internal system user called "PUBLIC". Because PUBLIC is an internal system user that represents an unauthenticated user session, it does not expose the typical user profile attributes associated with a normal authenticated user session (for example, First name, Last name, anad so on). Therefore, it is recommended that portlets that explicitly leverage user profile information only be added to non-public (that is, authenticated) pages. This will ensure that the user profile data exists for the portlet to leverage.
When you register a WSRP producer in an Enterprise configuration, you must create a Web Services Definition Language (WSDL) document manually, then register the WSRP producer using that WSDL. This is because the dynamically generated WSDL creates URLs using the HTTPS protocol and the HTTPS port while WSRP producers use HTTP.
|
Note: A producer for WSRP portlets is analogous to a provider for PDK-Java portlets. |
To create a WSDL document manually, perform the following tasks:
View the dynamically generated WSDL through your browser (preferably Internet Explorer).
To view the WSDL for our WSRP samples, go to:
http://<host>:<external http port>/portletapp/portlets?WSDL
Save the file from the browser to any externally available location.
For our WSRP Samples, save the file from the browser into the following directory:
ORACLE_HOME/j2ee/home/applications/portletapp/wsrp-samples
Save the file as wsrpsamples.wsdl.
Edit the file, replacing https with http and correcting the ports to be the external http ports.
View the file through a browser.
For example, for our WSRP Samples use the following URL:
http://<host>:<external http port>/portletapp/wsrpsamples.wsdl
Use the URL to your *.wsdl file (such as the URL under Step 4) when you register the WSRP producer.
For more information about Enterprise configurations, see the Oracle Application Server Enterprise Deployment Guide at the following location:
http://www.oracle.com/technology/documentation/appserver1012.html
If you have the Personalize Portlets (Full) privilege on two pages, Page A and Page B, then you cannot add or delete portlets on Page B when Page B is displayed as a page portlet on Page A. However, you can add or delete portlets when pages A and B are displayed as individual pages. This is a known issue.
The Federated Portal Adapter enables you to display remote portal pages in your portal. However, if both portal instances do not share the same OracleAS Single Sign-On server, then you cannot display a remote portal page as a page portlet, even if the remote page is public. A message is displayed instead of the page portlet, as shown in the following example:
Portlet 257,75057 responded with content-type text/plain when the client was requesting content-type text/html
As a workaround, configure both portal instances to use the same OracleAS Single Sign-On server.
When you redeploy your portlets to the portlet container, all existing sessions between the producer and all of its consumers are lost. If a consumer tries to reuse an existing producer session, then it may receive an error message the first time it tries to contact the producer after redeployment, as shown in the following example:
Error: Could not get markup. The cookie or session is invalid or there is a runtime exception.
To reestablish the producer's session, refresh the portal page. You will not see this error message if you are reaccessing the portlet from a new browser session because it automatically establishes a new producer session.
This section describes issues and workarounds related to Globalization Support in OracleAS Portal. It includes the following topics:
Section 8.1.5.1, "Text Entry Always Right to Left in BiDi Languages"
Section 8.1.5.3, "Non-ASCII Character Limitations in OracleAS Portal"
Section 8.1.5.4, "Non-ASCII Character Limitations in Oracle Instant Portal"
Section 8.1.5.5, "Errors Displayed When the OracleAS Portal Language Is Traditional Chinese"
The direction of all text areas and fields is right to left (RTL). However, you may want some text areas to work left to right (LTR). Internet Explorer users can change this by pressing the left hand side Ctrl and Shift keys.
To display Oracle Instant Portal correctly in bi-directional languages such as Arabic and Hebrew, use Internet Explorer.
This section discusses non-ASCII character limitations when working with OracleAS Portal:
In Web Folders, if you change the name of a portal page to use non-ASCII characters, then an error message displays.
In some non-ASCII character set environments, you cannot use the Browse Users or Browse Groups list of values to select a user or group name. As a workaround, you can enter the user or group name manually.
When you copy and paste an item URL containing non-ASCII characters from one browser Location or Address field into another, you may not be able to access the item if your login credentials have not been authenticated through OracleAS Single Sign-On.
As a workaround, log in to the portal before you access the item and copy the item URL.
To use Oracle Instant Portal in an environment that supports non-ASCII character sets, you must use the UTF8 or AL32UTF8 database character set.
When the portal language is set to Traditional Chinese you may see errors while working with portlets, such as the Custom Search portlet, or when using the Navigator. Such errors can occur if the value of the shared_pool_size parameter of the OracleAS Metadata Repository database is set too low.
As a workaround, increase the value of the shared_pool_size parameter of the OracleAS Metadata Repository database. The recommended minimum size is 144MB, but this is too low for the Traditional Chinese language. Increase the value of the shared_pool_size parameter to 216MB, or higher.
This section describes issues and workarounds related to OracleAS Portal 10g Release 2 (10.1.2). It includes the following topics:
Section 8.2.4, "Portlet and Provider Issues and Workarounds"
Section 8.2.6, "Globalization Support Issues and Workarounds"
This section describes general issues and their workarounds in OracleAS Portal. It includes the following topics:
After installing OracleAS Metadata Repository using OracleAS Metadata Repository Creation Assistant, the following error is recorded in the portal.log file:
Error while opening file: /private1/iasinst/Repca_050712/portal/admin/plsql/lib/sitedb.jar Exception java.io.FileNotFoundException: /private1/iasinst/Repca_050712/portal/admin/plsql/lib/sitedb.jar
This error does not affect the installation process and can be ignored.
If you configure an OracleAS Cold Failover Cluster (Middle Tier) that resides on the same node as the infrastructure associated with the middle tier from which the portal is running, then you may see the following error when you log in to OracleAS Portal:
Internal error (WWC-00006) Unexpected error encountered in wwsec_app_priv.process_signon (User-Defined Exception) (WWC-41417)
The Oracle Internet Directory host name in the Portal Dependency Settings file, iasconfig.xml, may incorrectly specify the host name of the new middle tier. As a workaround, perform the following steps:
Update the IASInstance element in the iasconfig.xml file so that the Host (of the IASInstance element associated with the Oracle Internet Directory component) is that of the Oracle Internet Directory host.
Run the ptlconfig tool to update the Oracle Internet Directory settings, as shown in the following example:
ptlconfig -dad <dad> -pw <portal schema password or Oracle Internet Directory password> -oid
For more information about updating the iasconfig.xml file and running ptlconfig, refer to Appendix A "Using the Portal Dependency Settings Tool and File" in Oracle Application Server Portal Configuration Guide.
This section describes User Interface-related issues and their workarounds in OracleAS Portal. It includes the following topics:
When you add a region to a page displayed in a generic page portlet, the new region is not displayed immediately as expected. As a workaround, manually invalidate the cache by clicking the Clear Cache link (Access tab) for the page containing the generic page portlet.
If a page displays a page portlet (Portlet A) with a subpage link to a page with tabs and portlets (Portlet B), the portlets under tabs in Portlet B are not displayed if you use the subpage link to navigate to Portlet B, from Portlet A. This is a known issue.
If you use the List View to set access privileges for one or more pages, then privileges will not be set on pages inheriting privileges from a parent page or template. As a workaround, change the privileges for such pages individually, that is, using the Access tab for the subpage.
This section describes export and import issues and their workarounds in OracleAS Portal. It includes the following topic:
If you include Reports Server Components within a transport set, then they are deleted on export and import. In addition, do not configure the Oracle Reports item type in any page groups intended for export and import. If you do, then the following error is displayed when you try to configure item types in the imported page group (by clicking the Content Type and Classifications Edit link on the Configure tab for the page group):
Internal error (WWC-00006) Unexpected error - User-Defined Exception (WWC-35000) Unexpected error - ORA-01403: no data found (WWC-35000)
This section describes issues and workarounds related to OmniPortlet, Web Clipping, Simple Parameter Form, and Page portlet. This section includes the following topics:
Section 8.2.4.1, "Using OmniPortlet Web Page Data Source After Cloning"
Section 8.2.4.2, "Error Exporting and Importing OmniPortlet and Web Clipping Customizations"
Section 8.2.4.3, "Issue Adding or Deleting Portlets on Page Portlets"
If you clone a middle-tier instance, then you must perform the following steps before you can use OmniPortlet Web Page Data Source:
Open the web.xml file.
ORACLE_HOME/j2ee/OC4J_Portal/applications/portalTools/omniPortlet/WEB-INF/web.xml
If the usePort context parameter is present, then set it to the Oracle HTTP Server port of the cloned target instance. This port number is specified in ORACLE_HOME/install/portlist.ini.
Restart the OC4J_Portal instance.
ORACLE_HOME/opmn/bin/opmnctl stopproc process-type=OC4J_Portal ORACLE_HOME/opmn/bin/opmnctl startproc process-type=OC4J_Portal
During the import or export of OmniPortlet or Web Clipping provider customizations, an error message similar to the following may be displayed:
[Warning: (WWU-74505)] context = Import of one of the web provider customization failed user = PORTAL An error occurred importing data to the web provider OMNIPORTLET.
As a workaround, refresh the OmniPortlet and Web Clipping providers in the portlet repository on both the source and target portals before performing an import or export.
This issue is valid only for release 10.1.2.0.0. It has been fixed in release 10.1.2.0.2.
If you have the Customize Portlets (Full) privilege on two pages, Page A and Page B, then you cannot add or delete portlets on Page B when Page B is displayed as a page portlet on Page A. However, you can add or delete portlets when pages A and B are displayed as individual pages. This is a known issue.
Oracle Application Server Portal Developer Kit (PDK) version 10.1.2 is included with the Portal and Wireless installation. Release notes for the PDK-Java and PDK-PL/SQL can be found at the following middle-tier ORACLE_HOME locations:
PDK-Java: ORACLE_HOME/portal/pdkjava/v2/pdkjava.v2.releasenotes.html
PDK-PL/SQL: ORACLE_HOME/portal/pdkjava/v2/pdkplsql.release.notes.html
Latest Version of OracleAS PDK
New versions of the OracleAS PDK are released periodically providing new features, new APIs, and additional documentation. To take advantage of all the latest features, download the latest PDK from the PDK downloads page on the Oracle Technology Network (OTN) at http://www.oracle.com/technology/products/ias/portal/pdk.html.
Release notes for the latest OracleAS PDK version are available on Oracle Application Server Portal on OTN and also in these PDK download locations:
pdk\plsql\pdkplsql.release.notes.html
pdk\jpdk\v2\pdkjava.v2.release.notes.html
This section includes the following PDK-related issues and workarounds in OracleAS Portal:
|
See Also: Section 8.2.7.1.12, "Exposing Your Application as a Web Service" for issues related to adding a custom JPS provider. |
OracleAS Portal supports the building of Java Specification Request (JSR) 168 portlets starting in Oracle Application Server 10g Release 1 (9.0.4). OracleAS Portal does not yet support consumption of Web Services for Remote Portlets (WSRP)-enabled portlets. Currently, you can only test your JSR 168 portlets against the hosted OracleAS Portal Verification Service at http://portalstandards.oracle.com/ or the Developers Preview for OracleAS Portal available for download. Note that both the Developers Preview and the hosted OracleAS Portal Verification Service are provided for development purposes only and, should not be used for production systems.
In previous releases of the Oracle Application Server Portal Developer Kit, in order to use the Struts text tag for entering form values, the provider passAllUrlParams flag had to be set to true, which affected the performance of OracleAS Web Cache, and the field name had to be unqualified. There are no such restrictions from OracleAS Portal 10g Release 2 (10.1.2) onwards.
This section describes issues and workarounds related to Globalization Support in OracleAS Portal. It includes the following topics:
Section 8.2.6.1, "Oracle Text Searching Limitation (Text Files and HTML Files)"
Section 8.2.6.2, "Text Entry Always Right to Left in BiDi Languages"
Section 8.2.6.3, "Non-ASCII Character Limitations in OracleAS Portal"
Section 8.2.6.4, "Non-ASCII Character Limitations in Oracle Instant Portal"
Section 8.2.6.5, "Shared Type Objects Cannot Be Exposed in Non-English Page Group"
Section 8.2.6.6, "Translations Lost When Item Versioning Is Enabled"
In some non-ASCII character set environments, you are unable to search non-ASCII character content of plain text files and HTML files.
You can search plain text and HTML files if the document character set is the same as the database character set.
The direction of all text areas and fields is right to left (RTL). However, you may want some text areas to work left to right (LTR). Internet Explorer users can change this by pressing the left hand side Ctrl and Shift keys.
This section discusses non-ASCII character limitations when working with OracleAS Portal:
Non-ASCII XML data is not displayed correctly in the XML Portlet. To display non-ASCII XML data, use OmniPortlet, which has this functionality.
If you use non-ASCII characters in Web Provider Display Names, then they are not displayed correctly. Similarly non-ASCII characters used in Provider Group Display Names cannot be displayed.
In Web Folders, if you change the name of a portal page to use non-ASCII characters, then an error message displays.
In some non-ASCII character set environments, you cannot use the Browse Users or Browse Groups list of values to select a user or group name. As a workaround, you can enter the user or group name manually.
When you copy and paste an item URL containing non-ASCII characters from one browser Location or Address field into another, you may not be able to access the item if your login credentials have not been authenticated through OracleAS Single Sign-On.
As a workaround, log in to the portal before you access the item and copy the item URL.
To use Oracle Instant Portal in an environment that supports non-ASCII character sets, you must use the UTF8 or AL32UTF8 database character set.
Shared type objects (page types and item types) always have English as the default language. If you create a page group in a language other than English, then a shared type cannot be made available to the page group unless a translation exists for the shared type in the default language of the page group.
To create the translation, follow these steps:
Enable the language for the Shared Objects page group.
For details, see Oracle Application Server Portal User's Guide - Section 4.6.1 Creating a Translation.
Switch to the language in the Set Language portlet.
Edit the page type or item type while the session language is set to the non-English language.
This automatically creates a translation of the type in that language.
You can now make the shared type available to the non-English page group.
If versioning is enabled and the page group has two or more translations (for example, the default language is English and translations are enabled for German and French), then adding a translation as a new version does not display the other translation. For example, if you add or edit a French translation as a new version, then the German translation is no longer visible to the page viewers. As a workaround, when multiple translations are required, disable item versioning, or use the "overwrite" mode when adding or updating translations.
This section describes known errors and omissions in OracleAS Portal documentation:
This section describes known errors in OracleAS Portal documentation. It includes the following topics:
Section 8.2.7.1.3, "Referencing the Current Version of Images"
Section 8.2.7.1.5, "Unpublished Items Section Documented Incorrectly"
Section 8.2.7.1.8, "Defining a Display Style for Results from a Custom Search"
Section 8.2.7.1.9, "Applying Background Color or Image to Page Portlets"
Section 8.2.7.1.11, "Corporate Page Groups No Longer Installed"
Section 8.2.7.1.12, "Exposing Your Application as a Web Service"
Section 8.2.7.1.13, "Changes Required in the Steps to Configure Security in OracleAS Portal"
Section 8.2.7.1.14, "Portal Upgrade Error and Warning Messages Should Be Prefixed with WWU-"
The online help states that clicking the Edit icon enables you to edit the properties of the item or portlet. While this is true for items, clicking this icon next to a portlet takes you to the Edit Defaults page. To edit the portlet instance attributes (such as display name), click the Actions icon, then click the Edit Portlet Instance link.
Online help for Pending Items: Preview (cawkpend.htm) incorrectly states that the submitter can continue to edit a pending item if it has not yet been approved by the first approver in the approval process.
Image attributes can reference an uploaded source image. The documentation currently states:
To reuse an image that has been uploaded to OracleAS Portal, enter its internal name (not file name) without a path in this field, for example, enter 1645.GIF.
If you are versioning the referenced image item, and you use the internal file name in the reference (for example, 1645.gif), then the reference does not use a new, current version of the image if one is created. The image reference continues to show the original version. For example:
In an image attribute, reference an image item by its internal file name, for example, 1645.gif.
Update the image item and create a new version. The new version is given a new internal file name (for example, 1705.gif).
The image attribute still refers to 1645.gif, it has not been updated to refer to the new version of the image.
Therefore, only use the internal file name if you are not using versioning, or if you want the reference to always point to the original version, even if it is no longer the current version.
If you are using versioning and you always want to show the current version, then use the durable link to the image item instead of the internal file name. The durable link always picks up the latest version of the image. So, instead of entering 1645.gif, enter:
/pls/<DAD>/url/item/<GUID>
This is the relative URL format of a durable link. For example:
/pls/portal/url/ITEM/A47D41ECA23648A9E030007F0100118A
Relative URLs should always be used in case the host or domain name changes, or the content is exported to another site. For more information on durable URLs, refer to section "Understanding Page and Item URLs" in Oracle Application Server Portal User's Guide.
List View functionality is documented in the online help topic Page Edit Mode: List View (pobpglst.htm). Some information in this topic is incorrect:
Button: Actions List - Options Enable ILS and Disable ILS are not available.
Button: Find - The search is not case-sensitive.
Subitems - The online help states that the List View does not display sub-items. This is correct, however, sub-items will be listed in search results if they meet the search criteria.
Also, note that in List View, pages based on templates do not show any tabs or items belonging to the template. You must click the Edit Template link to see tabs and items on a template. Therefore, when editing the page in List View, you cannot add items to tabs that are inherited from the template. Likewise, if items are added to these tabs when editing the page using another edit view (for example, Graphical View), you do not see these items in List View.
If you are using Netscape 4.8, then you may notice that version information is incorrectly displayed under the Description column. This is not a problem in Internet Explorer.
Online help for the Edit Page Group Items tab (sbrsmit.htm) incorrectly refers to the Expired and Deleted Items section and the Display Expired and Deleted Items and Retain Expired and Deleted Items check boxes. These should be, respectively, the Unpublished Items section and the Display Unpublished Items In Edit Mode and Retain Deleted Items check boxes. Refer to the text on the page itself for details on how to use these check boxes.
The online help incorrectly states that when item-level security (ILS) is enabled, page caching is automatically disabled. Page caching is not disabled when ILS is enabled.
Online help for the Edit Portal User Profile tabs, Preferences (secumed1.htm) and Privileges (secgmed3.htm), incorrectly states that there are Reset to Defaults buttons on these pages. This option is not available.
Online help for Edit Defaults: Custom Search - Results Display page (sbrrsres.htm) incorrectly states that style and attribute settings apply only to items returned in search results. The Style and Attribute settings (section Which style and attributes should be used to render the search results?) apply to both items and pages.
If you want page portlets (including navigation pages) to display a background color or background image, then follow these steps:
Ensure that the navigation page uses its own style when published as a portlet, that is, do not select Use Style Of Page On Which Portlet Is Placed in the page properties.
In the style for the container page (the page containing the portlet), set Portlet Body Color to null (no value). This step is missing from the documentation.
The Oracle Application Server Portal Configuration Guide provides instructions on how to register a JSR 168 portlet in a local instance of OracleAS Portal, in section "Registering and Viewing Your Portlet". These instructions do not apply to the current production release of the product, but can be used for the Developer's Preview release until the production WSRP-enabled OracleAS Portal is released. Please note that the Developer's Preview is provided for development purposes only, and should not be used for production systems.
In some sections of the documentation, you may find reference to the Corporate Pages page group. This page group is no longer installed with OracleAS Portal and you may disregard any mention of it in the documentation. However, if you are upgrading an existing OracleAS Portal instance which contained the Corporate Pages page group, then it will not be removed by the upgrade.
Section "Exposing Your Application as a Web Service" in the Oracle Application Server Portal Developer's Guide has an inaccurate step and a missing step. The section should read as follows:
Before you deploy your WAR file to the Oracle Application Server, you must perform the following steps:
Update your web.xml file. These entries are required to expose your application as a Web Service as soon as it is deployed.
<web-app>
<description>Empty web.xml file for Web Application</description>
<session-config>
<session-timeout>35</session-timeout>
</session-config>
<mime-mapping>
<extension>html</extension>
<mime-type>text/html</mime-type>
</mime-mapping>
<mime-mapping>
<extension>txt</extension>
<mime-type>text/plain</mime-type>
</mime-mapping>
<filter>
<filter-name>portletfilter</filter-name>
<filter-class>oracle.webdb.wsrp.server.ContextFilter</filter-class>
</filter>
<filter-mapping>
<filter-name>portletfilter</filter-name>
<servlet-name>portletjaxrpc</servlet-name>
</filter-mapping>
<filter-mapping>
<filter-name>portletfilter</filter-name>
<servlet-name>portletresource</servlet-name>
</filter-mapping>
<servlet>
<servlet-name>portletdeploy</servlet-name>
<servlet-class>oracle.webdb.wsrp.server.deploy.PortletDeployServlet</servlet-class>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet>
<servlet-name>portletjaxrpc</servlet-name>
<servlet-class>com.sun.xml.rpc.server.http.JAXRPCServlet</servlet-class>
<init-param>
<param-name>configuration.file</param-name>
<param-value>/WEB-INF/WSRPService_Config.properties</param-value>
</init-param>
</servlet>
<servlet>
<servlet-name>portletresource</servlet-name>
<servlet-class>oracle.webdb.wsrp.server.ResourceServlet</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>portletjaxrpc</servlet-name>
<url-pattern>/portlets*</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>portletresource</servlet-name>
<url-pattern>/portletresource*</url-pattern>
</servlet-mapping>
</web-app>
When adding a custom JPS producer to the Oracle Application Server OC4J instance, you also must add the following library paths in your application.xml file:
<library path="$ORACLE_HOME/portal/jlib/commons-logging.jar"/> <library path="$ORACLE_HOME/portal/jlib/dom4j.jar"/> <library path="$ORACLE_HOME/portal/jlib/jaxrpc-api.jar"/> <library path="$ORACLE_HOME/portal/jlib/jaxrpc-ri-patched.jar"/> <library path="$ORACLE_HOME/portal/jlib/namespace.jar"/> <library path="$ORACLE_HOME/portal/jlib/relaxngDatatype.jar"/> <library path="$ORACLE_HOME/portal/jlib/ptlshare.jar"/> <library path="$ORACLE_HOME/portal/jlib/saaj-api.jar"/> <library path="$ORACLE_HOME/portal/jlib/saaj-ri.jar"/> <library path="$ORACLE_HOME/portal/jlib/wsrp-common.jar"/> <library path="$ORACLE_HOME/portal/jlib/wsrp-container.jar"/> <library path="$ORACLE_HOME/portal/jlib/oracle-portlet-tags.jar"/> <library path="$ORACLE_HOME/lib/xml.jar"/> <library path="$ORACLE_HOME/lib/xmlmesg.jar"/> <library path="$ORACLE_HOME/lib/xmlparserv2.jar"/> <library path="$ORACLE_HOME/portal/jlib/xsdlib.jar"/>
The chapter titled, "Securing OracleAS Portal" in the Oracle Application Server Portal Configuration Guide has the following known errors:
Step 1 in subsection "Configuring SSL to OracleAS Single Sign-On Using SSLConfigTool" under Section 6.3.2.1.2, "SSL to OracleAS Single Sign-On", currently states the following:
Enter n when prompted by the script to configure your site to accept browser requests using the SSL protocol.
This task must not be performed in step 1, as you will not be prompted for any input when you use the -config_w_default option. This task must be performed in step 3 in the same procedure where you run SSLConfigTool in the middle-tier Oracle home.
Step 2 in subsection "Configuring SSL to OracleAS Web Cache Using SSLConfigTool" under Section 6.3.2.1.3, "SSL to OracleAS Web Cache", currently states the command to run SSLConfigTool as shown:
SSLConfigTool.bat -config_w_default -opwd <orcladmin_pwd>
However, the command must be used as follows:
SSLConfigTool.bat -config_w_prompt -ptl_inv_pwd <ptl_inv_pwd> -opwd <orcladmin_pwd>
Step 2 in subsection "Configuring SSL Throughout OracleAS Portal Using SSLConfigTool" under Section 6.3.2.1.4, "SSL Throughout OracleAS Portal" currently states the following:
Enter the following values when prompted by the script:
y, when prompted to configure your site to accept browser requests using the SSL protocol.
y, when asked if your Oracle HTTP Server accepts requests in SSL protocol.
This task must not be performed in step 2, as you will not be prompted for any input when you use the -config_w_default option. This task must be performed in step 3 where you run SSLConfigTool in the middle-tier Oracle home.
The following step is missing in subsection "Configuring SSL to OracleAS Web Cache Using SSLConfigTool" under Section 6.3.2.1.3, "SSL to OracleAS Web Cache":
Enable SSL on the OracleAS Infrastructure that has Identity Management installed and then run SSLConfigTool in the infrastructure Oracle home, as shown in the following example, for Windows:
SSLConfigTool.bat -config_w_default -opwd <orcladmin_pwd>
Where:
config_w_default is used to run the tool in silent mode using the values specified in the portlist.ini and ias.properties files.
opwd is the Oracle administrator password. If no password is specified, then you will be prompted to enter the password.
Perform this step after step 1.
The Portal upgrade error and warning messages described in Chapter 6, "UPG-00001 to UPG-26001" of the Oracle Application Server Portal Error Messages Guide 10g Release 2 (10.1.2) are incorrectly prefixed with UPG-. These error and warning messages should be prefixed with WWU-.
This section describes known omissions and additions to the OracleAS Portal documentation. It includes the following topics:
Section 8.2.7.2.1, "Inaccurate Data in Log Registry Records"
Section 8.2.7.2.2, "Expired Items Remain Visible in WebDAV Clients"
Section 8.2.7.2.4, "Using Oracle Drive with OracleAS Portal"
Section 8.2.7.2.6, "Error Removing Subscriber from Virtual Private Portal"
Section 8.2.7.2.7, "Unable to Monitor WSRP Providers in This Release"
Section 8.2.7.2.8, "Location of the ptlwsrp_data.sql Script"
Online help describing Log Registry records (wvlogadm.htm) lists the set of actions that are logged. Since the introduction of OracleAS Web Cache, some of the actions logged in OracleAS Portal Activity Log tables have become inaccurate. Specifically, these actions are View, Execute, Show, and Perform. However, since all other actions logged are still accurate, the Activity Log tables and views still remain in the OracleAS Metadata Repository.
Expired items continue to be visible in WebDAV clients until they are permanently removed from the database during a system purge.
The Rich Text Editor (WYSIWIG editor) that is used in OracleAS Portal to apply formatting to text items is described in a Technical Note OracleAS Portal 9.0.4.1 – Enhanced Rich Text Editor on OTN at http://www.oracle.com/technology/products/ias/portal/content_management.html.
OracleAS Portal leverages the features of Oracle Drive to manage and publish portal content directly from the Windows desktop.
Oracle Drive is a powerful WebDAV client. It maps the Oracle Portal Repository as a drive and enables you to perform desktop authoring and publishing, as well as portal-specific metadata attribution, from the Windows desktop. For further information, refer to the technical note, How to Install and Configure the Oracle Drive on OTN at http://www.oracle.com/technology/products/ias/portal/content_management_10gr2.html.
You cannot delete a tab on a template (even with Manage Template privileges), if other users have placed content on the tab, in pages that are based on this template.
The following error can display when you use the rmsub.csh script to remove a subscriber from a Virtual Private Portal (VPP):
ERROR: Interface Version Specified does not match Profile Interface Version - 1.1 Could not delete Provisioning Profile.
This error does not impact the use of VPP.
Oracle Enterprise Manager 10g Help describes how to monitor Web providers, database providers, and WSRP producers registered with OracleAS Portal. Support for WSRP providers will be provided in a future release. It is not possible to monitor WSRP providers in 10g Release 2 (10.1.2).
Section "Using the ptlwsrp_data.sql Script to Create the WSRP Portlet Preference Store" in Appendix C of the Oracle Application Server Portal Configuration Guide mentions the use of the script ptlwsrp_data.sql. It does not mention that this script first needs to be downloaded from Portal Center:
