Skip Headers
Oracle® Application Server Integration InterConnect Adapter for Oracle Applications Installation and User's Guide
10g Release 2 (10.1.2)
B14360-02
  Go To Documentation Library
Home
Go To Product List
Solution Area
Go To Table Of Contents
Contents
Go To Index
Index

Previous
Previous
Next
Next
 

2 Installation and Configuration

This chapter describes how to install and configure the OA adapter. It contains the following topics:

Installing the OA Adapter

The OA adapter must be installed in an existing Oracle home Middle Tier for Oracle Application Server Integration InterConnect 10g Release 2 (10.1.2).

This section contains the following topics:

Preinstallation Tasks

Refer to the following guides before installing the OA adapter:

  • Oracle Application Server Installation Guide for information about OUI startup.

  • Oracle Application Server InterConnect Installation Guide, for information about software, hardware, and system requirements for OracleAS Integration InterConnect.


    Note:

    OracleAS Integration InterConnect hub is installable through the OracleAS Integration InterConnect hub installation type. You must install the OracleAS Integration InterConnect hub before proceeding with the OA adapter installation.

Installation Tasks

To install the OA adapter:

  1. On the Available Product Components screen of the OracleAS Integration InterConnect installation Wizard, select OracleAS Integration InterConnect Adapter for Oracle Applications 10.1.2.0.2 and click Next.

  2. The Set Oracle Wallet Password screen is displayed. Enter and confirm the password on the screen, which will be used to manage OracleAS Integration InterConnect installation. Click Next.

    • Go to step 3 if installing the OA adapter in an OracleAS Middle Tier Oracle home that does not have an InterConnect component already installed. Ensure that the OracleAS Integration InterConnect hub has been installed.

    • Go to step 4 if installing the OA adapter in an OracleAS Middle Tier Oracle home that has an existing InterConnect component. Ensure that it is a home directory to an OracleAS Integration InterConnect component.

  3. The Specify Hub Database Connection screen is displayed. Enter information in the following fields:

    • Host Name: The host name of the computer where the hub database is installed.

    • Port Number: The TNS listener port for the hub database.

    • Database SID: The SID for the hub database.

    • Password: The password for the hub database user.

  4. Click Next. The Specify Oracle Applications Adapter Name screen is displayed.

  5. Enter the application name. Blank spaces are not permitted. The default value is myOracleAppsAdapter.


    Note:

    You can change the application name in iStudio after installation. In such a case, you need to specify the password corresponding to new application name in the Oracle Wallet.

    For more informtion, refer to the following sections in Appendix A, "Frequently Asked Questions":


  6. Click Next. The Specify Spoke Application Database Connection screen is displayed. This configures the information to the spoke application database. Enter information in the following fields:

    • Host Name: The name of the computer where the application database is installed.

    • Port Number: The TNS listener port for the application database.

    • Database SID: The SID for the application database.

    • Sys Password: The password of the sys user in the spoke database.

    The information on this screen is for Oracle Applications, from which the adapter will deliver or receive messages.

  7. Click Next. The Specify APPS Schema Password screen is displayed. Enter the password for the schema name in Password field.

  8. Click Next. The Set Bridge Schema Password screen is displayed.

  9. Enter and confirm the password for the bridge schema.

  10. Click Next. The Summary screen is displayed.

  11. Click Install to install the OA adapter and other selected components. The OA adapter is installed in the following directory:

    Platform Directory
    UNIX ORACLE_HOME/integration/interconnect/adapters/Application
    Windows ORACLE_HOME\integration\interconnect\adapters\Application

    Application is the value specified in Step 5.

  12. Click Exit on the Installation screen to exit the OA adapter installation.

Installing Multiple OA Adapters in the Same Oracle Home

To install multiple instances of the OA adapter in same Oracle home, use the copyAdapter script located in the ORACLE_HOME/integration/interconnect/bin directory.

Usage: copyAdapter app1 app2

For example, you have one instance of OA adapter with name myOAApp installed on a computer. To install another instance of the OA adapter with name myOAApp1 in the same Oracle home, use the following command:

copyAdapter myOAApp myOAApp1

The copyAdapter script is copied to the following bin directory only during Hub installation:

If you need to use this script to create multiple adapters on a spoke computer, then copy the script to the bin directory on the spoke computer, and edit the script to reflect the new Oracle home.

After running the copyAdapter script, If you want to manage or monitor the newly installed adapter through Oracle Enterprise Manager 10g Application Server Control Console, then you need to modify the opmn.xml file by adding information about the new instance. For example, you have created a new instance of the OA adapter myOAApp1 by using the copyAdapter script. To manage the myOAApp1 adapter through Enterprise Manager, perform the following:

  1. Navigate to the MiddleTier\bin directory and run the following command to stop the Enterprise Manager:

    emctl stop iasconsole
    
    
  2. Next, specify the information about this new instance in the opmn.xml file located in the ORACLEMIDDLETIER_HOME/opmn/conf directory as follows:

    <process-type id="myOAApp1" module-id="adapter" working-dir="$ORACLE_
    HOME/integration/interconnect/adapters/myOAApp1" status="enabled">
           <start timeout="600" retry="2"/>
           <stop timeout="120"/>
           <port id="icadapter_dmsport_range" range="15701-15800"/>
           <process-set id="myOAApp1" restart-on-death="true" numprocs="1">
                <module-data>
                    <category id="start-parameters">
                        <data id="java-parameters" value="-Xms8M"/>
                        <data id="class-name"
                         value="oracle.oai.agent.service.AgentService"/>
                    </category>
                    <category id="stop-parameters">
                        <data id="java-parameters" value="-mx64m"/>
                        <data id="class-name"
                         value="oracle.oai.agent.proxy.ShutdownAgent"/>
                        <data id="application-parameters"
                         value="persistence/Agent.ior"/>
                    </category>
                </module-data>
           </process-set>
    </process-type>
    
    

    The opmn.xml file would appear like this:

    <process-type id="myOAApp" module-id="adapter" working-dir="$ORACLE
    _HOME/integration/interconnect/adapters/myOAApp" status="enabled">
           <start timeout="600" retry="2"/>
           <stop timeout="120"/>
           <port id="icadapter_dmsport_range" range="15701-15800"/>
           <process-set id="myOAApp" restart-on-death="true" numprocs="1">
                <module-data>
                    <category id="start-parameters">
                        <data id="java-parameters" value="-Xms8M"/>
                        <data id="class-name"
                         value="oracle.oai.agent.service.AgentService"/>
                    </category>
                    <category id="stop-parameters">
                        <data id="java-parameters" value="-mx64m"/>
                        <data id="class-name"
                 value="oracle.oai.agent.proxy.ShutdownAgent"/>
                 <data id="application-parameters"
                  value="persistence/Agent.ior"/>
             </category>
         </module-data>
      </process-set>
    </process-type>
                
    <process-type id="myOAApp1" module-id="adapter" working-dir="$ORACLE
    _HOME/integration/interconnect/adapters/myOAApp1" status="enabled">
           <start timeout="600" retry="2"/>
           <stop timeout="120"/>
           <port id="icadapter_dmsport_range" range="15701-15800"/>
           <process-set id="myOAApp1" restart-on-death="true" numprocs="1">
            <module-data>
              <category id="start-parameters">
                  <data id="java-parameters" value="-Xms8M"/>
                  <data id="class-name"
                   value="oracle.oai.agent.service.AgentService"/>
              </category>
              <category id="stop-parameters">
                   <data id="java-parameters" value="-mx64m"/>
                   <data id="class-name"
                    value="oracle.oai.agent.proxy.ShutdownAgent"/>
                   <data id="application-parameters"
                    value="persistence/Agent.ior"/>
              </category>
            </module-data>
           </process-set>
    </process-type>
    
    
  3. Save the opmn.xml file.

  4. Navigate to the MiddleTier\opmn\bin directory and run the following command to reload the OPMN:

    opmnctl reload
    
    
  5. You can start the myOAApp1 adapter by using the following command

    opmnctl startproc ias-component="InterConnect" process-type="myOAApp1"
    
    
  6. Navigate to the MiddleTier\bin directory and run the following command to start the Enterprise Manager:

    emctl start iasconsole
    
    
  7. Login to the Oracle Enterprise Manager 10g Application Server Control Console to view and manage the newly installed or copied adapter. For information about how to use Oracle Enterprise Manager 10g Application Server Control Console , refer to the Oracle Application Server Integration InterConnect User's Guide


Note:

While installing multiple adapters in the same computer, the copyadapter script does not create entries for the new adapter's password in the Oracle Wallet. You need to manually create a password for this new adapter using the Oracle Wallet Manager. To store the password in Oracle Wallet, use the following format:
ApplicationName/password

The number of entries is dependent on the type of adapter. For example, Database Adapter needs two entries whereas AQ Adapter needs only one entry. For more information about how to manage your passwords in Oracle Wallet, refer to AppendixA, "How do I secure my passwords?" in Appendix A, "Frequently Asked Questions"


Configuring the OA Adapter

After an OA adapter installation, you can configure it according to your requirements. The following tables describe the location and details of the configuration files.

Table 2-1 describes the location where the adapter is installed.

Table 2-1 OA Adapter Directory

Platform Directory

UNIX

ORACLE_HOME/integration/interconnect/adapters/Application

Windows

ORACLE_HOME\integration\interconnect\adapters\Application


Table 2-2 describes the various executable files available for the OA adapter.

Table 2-2 OA Executable Files

File Description

start (UNIX)

Does not take parameters; starts the adapter.

start.bat (Windows)

Does not take parameters; starts the adapter.

stop (UNIX)

Does not take parameters; stops the adapter.

stop.bat (Windows)

Does not take parameters; stops the adapter.


Table 2-3 describes the OA adapter configuration files.

Table 2-3 OA Configuration Files

File Description

adapter.ini (UNIX)

Consists of all the initialization parameters that the adapter reads at startup.

adapter.ini (Windows)

Consists of all the initialization parameters that the adapter reads at startup.


Table 2-4 describes the directories used by the OA adapter.

Table 2-4 OA Directories

Directory Description

logs

The logging of adapter activity is done in subdirectories of the logs directory. Each new run of the adapter creates a new subdirectory in which logging is done in an log.xml file.

persistence

The messages are persisted (made available) in this directory. Do not edit this directory or its files.


OA Adapter Ini File Settings

The following are the .ini files used to configure the OA adapter:

hub.ini Parameters

The OA adapter connects to the hub database using the parameters in the hub.ini file located in the hub directory. Table 2-5 gives a description and an example for each parameter.

Table 2-5 hub.ini Parameters

Parameter Description Example

hub_host

The name of the computer hosting the hub database. There is no default value. The value is set during installation.

hub_host=mpscottpc

hub_instance

The SID of the hub database. There is no default value. The value is set during installation.

hub_instance=orcl

hub_port

The TNS listener port number for the hub database instance. There is no default value. The value is set during installation.

hub_port=1521

hub_username

The name of the hub database schema (or user name). The default value is ichub.

hub_username=ichub

repository_name

The name of the repository that communicates with the adapter. The default value is InterConnectRepository.

repository_name=InterConnectRepository


Oracle Real Application Clusters hub.ini Parameters

When a hub is installed on a Oracle Real Application Cluster database, the parameters listed in Table 2-6 represent information about additional nodes used for connection and configuration. These parameters are in addition to the default parameters for the primary node. In Table 2-6, x represents the node number which can range from 2 to total number of nodes in cluster. For example, if the cluster contains 4 nodes, then x can be a value between 2 and 4.

Table 2-6 Oracle Real Application Clusters hub.ini Parameters

Parameter Description Example

hub_hostx

The host where the Real Application Clusters database is installed.

hub_host2=dscott13

hub_instancex

The instance on the respective node.

hub_instance2=orcl2

hub_num_nodes

The number of nodes in a cluster.

hub_num_nodes=4

hub_portx

The port where the TNS listener is listening.

hub_port2=1521


adapter.ini Parameters

The agent component of the OA adapter reads the adapter.ini file at run time to access information on configuring the OA adapter parameter. Table 2-7 gives a description and an example for each parameter.

Table 2-7 adapter.ini Parameters

Parameter Description Example

agent_admin_port

Specifies the port through which the adapter can be accessed through firewalls.

Possible value: A valid port number

Default value: None

agent_admin_port=1059

agent_delete_file_cache_at_startup

Specifies whether to delete the cached metadata during startup. If any agent caching method is enabled, then metadata from the repository is cached locally on the file system. Set the parameter to true to delete all cached metadata on startup.

Possible values: true or false

Default value: false

Note: After changing metadata or DVM tables for the adapter in iStudio, you must delete the cache to guarantee access to new metadata or table information.

agent_delete_file_cache_at_startup=false

agent_dvm_table_caching

Specifies the Domain Value Mapping (DVM) table caching algorithm.

Possible values:

  • startup: Cache all DVM tables at startup. This may be time-consuming if there are many tables in the repository.

  • demand: Cache tables as they are used.

  • none: No caching. This slows down performance.

Default value: demand.

agent_dvm_table_caching=demand

agent_log_level

Specifies the amount of logging necessary.

Possible values:

0=errors only

1=status and errors

2=trace, status, and errors

Default value: 1

agent_log_level=2

agent_lookup_table_caching

Specifies the lookup table caching algorithm.

Possible values:

  • startup: Cache all lookup tables at startup. This may be time-consuming if there are many tables in the repository.

  • demand: Cache tables as they are used.

  • none: No caching. This slows down performance.

Default value: demand

agent_lookup_table_caching=demand

agent_max_ao_cache_size

Specifies the maximum number of application object metadata to cache.

Possible value: An integer greater than or equal to 1

Default value: 200

agent_max_ao_cache_size=200

agent_max_co_cache_size

Specifies the maximum number of common object metadata to cache.

Possible value: An integer greater than or equal to 1

Default value: 100

agent_max_co_cache_size=100

agent_max_dvm_table_cache_size

Specifies the maximum number of DVM tables to cache.

Possible value: An integer greater than or equal to 1

Default value: 200

agent_max_dvm_table_cache_size=200

agent_max_lookup_table_cache_size

Specifies the maximum number of lookup tables to cache.

Possible value: Any integer greater than or equal to 1

Default value: 200

agent_max_lookup_table_cache_size=200

agent_max_message_metadata_cache_size

Specifies the maximum number of message metadata (publish/subscribe and invoke/implement) to cache.

Possible value: An integer greater than or equal to 1

Default value: 200

agent_max_message_metadata_cache_size=200

agent_max_queue_size

Specifies the maximum size to which internal OracleAS Integration InterConnect message queues can grow.

Possible value: An integer greater than or equal to 1

Default value: 1000

agent_max_queue_size=1000

agent_message_selector

Specifies conditions for message selection when the adapter registers its subscription with the hub.

Possible value: A valid Oracle Advanced Queue message selector string (such as '%,aqapp,%')

Default value: None

agent_message_selector=%,aqapp,%

agent_metadata_caching

Specifies the metadata caching algorithm.

Possible values:

  • startup: Cache everything at startup. This may be time-consuming if there are many tables in the repository.

  • demand: Cache metadata as it is used.

  • none: No caching. This slows down performance.

Default value: demand.

agent_metadata_caching=demand

agent_persistence_cleanup_interval

Specifies how often to run the persistence cleaner thread in milliseconds.

Possible value: An integer greater than or equal to 30000 milliseconds

Default value: 60000

agent_persistence_cleanup_interval=60000

agent_persistence_queue_size

Specifies the maximum size of internal OracleAS Integration InterConnect persistence queues.

Possible value: An integer greater than or equal to 1

Default value: 1000

agent_persistence_queue_size=1000

agent_persistence_retry_interval

Specifies how often the persistence thread retries when it fails to send an OracleAS Integration InterConnect message.

Possible value: An integer greater than or equal to 5000 milliseconds

Default value: 60000

agent_persistence_retry_interval=60000

agent_pipeline_from_hub

Specifies whether to activate the pipeline for messages from the hub to the bridge. If you set the pipeline to false, then the file persistence is not used in that direction.

Possible value: true, false

Default value: false

agent_pipeline_from_hub=false

agent_pipeline_to_hub

Specifies whether to activate the pipeline for messages from the bridge to the hub. If you set the pipeline to false, then the file persistence is not used in that direction.

Possible value: true, false

Default value: false

agent_pipeline_to_hub=false

agent_reply_message_selector

Specifies the application instance to which the reply must be sent. This parameter is used if multiple adapter instances exist for the given application and given partition.

Possible value: A string built using the application name (parameter:application) concatenated with the instance number (parameter:instance_number).

Default value: None

If application=aqapp, instance_number=2, then agent_reply_message_selector=recipient_list like '%,aqapp2,%'

agent_reply_subscriber_name

Specifies the subscriber name used when multiple adapter instances are used for the given application and given partition. This parameter is optional if only one instance is running.

Possible value: The application name (parameter:application) concatenated with the instance number (parameter:instance_number).

Default value: None

If application=oaapp and instance_number=2, then agent_reply_subscriber_name=oaapp2

agent_subscriber_name

Specifies the subscriber name used when this adapter registers its subscription.

Possible value: A valid Oracle Advanced Queue subscriber name

Default value: None

agent_subscriber_name=oaapp

agent_throughput_measurement_enabled

Specifies if the throughput measurement is enabled. Set this parameter to true to activate throughput measurements.

Default value: true

agent_throughput_measurement_enabled=true

agent_tracking_enabled

Specifies if message tracking is enabled. Set this parameter to false to turn off tracking of messages. Set this parameter to true to track messages with tracking fields set in iStudio.

Default value: true

agent_tracking_enabled=true

agent_use_custom_hub_dtd

Specifies whether to use a custom DTD for the common view message when handing it to the hub. By default, adapters use a specific OracleAS Integration InterConnect DTD for all messages sent to the hub.

Set this parameter to true to have the adapter use the DTD imported for the message of the common view instead of the OracleAS Integration InterConnect DTD.

Default value: None

agent_use_custom_hub_dtd=false

application

Specifies the name of the application to which this adapter connects. This must match the name specified in iStudio while creating metadata.

Possible value: An alphanumeric string

Default value: None

application=oaapp

encoding

Specifies the character encoding for published messages. The adapter uses this parameter to generate encoding information for the encoding tag of transformed OracleAS Integration InterConnect messages. OracleAS Integration InterConnect represents messages internally as XML documents.

Possible value: A valid character encoding

Default value: UTF-8

When there is no existing encoding in the subscribed message, this parameter will be used to explicitly specify the encoding of the published message. This parameter will be ignored when the encoding already exists in the subscribed message.

encoding=Shift_JIS

external_dtd_base_url

Specify the base URL for loading external enitites and DTDs. This specifies to the XML parser to resolve the external entities in the instance document using the given URL.Possible value: A URLDefault value: The URL of the current user directory

external_dtd_base_url=file://C:\ORACLEHOME\Integration\InterConnect\adapters\AQApp\

instance_number

Specifies the instance number to which this adapter corresponds. Specify a value only if you have multiple adapter instances for the given application with the given partition.

Possible value: An integer greater than or equal to 1

Default value: None

instance_number=1

nls_country

Specifies the ISO country code. The codes are defined by ISO-3166.

Possible value: A valid code. A full list of the codes is available at http://www.chemie.fu-berlin.de/diverse/doc/ISO_3166.html

Default value: US

Note: This parameter specifies date format and is applicable only for the date format.

nls_country=US

nls_date_format

Specifies the format for a date field expressed as a string.

Possible value: A valid date format pattern as shown in Table 2-8 for the definitions of the format characters.

Default value: EEE MMM dd HHmmss zzz yyyy

Date format pattern dd/MMM/yyyy can represent 01/01/2003.

nls_date_format=dd-MMM-yy

Multiple date formats can be specified as num_nls_formats=2

nls_date_format1=dd-MMM-yy

nls_date_format2=dd/MMM/yy

nls_language

Specifies the ISO language code. The codes are defined by ISO-639.

Possible value: A valid code. A full list of these codes is available at http://www.ics.uci.edu/pub/ietf/http/related/iso639.txt

Default value: en

Note: This parameter specifies date format and is applicable only for the date format.

nls_language=en

partition

Specifies the partition this adapter handles as specified in iStudio.

Possible value: An alphanumeric string

Default value: None

partition=germany

service_class

Specifies the entry class for the Windows service.

Possible value: oracle/oai/agent/service/AgentService.

Default value: None

service_class=oracle/oai/agent/service/AgentService

service_classpath

Specifies the class path used by the adapter JVM. If a custom adapter is developed and the adapter is to pick up any additional jar files, then add the files to the existing set of jar files.

Possible value: A valid PATH setting

Default value: None

This parameter is only for Microsoft Windows.

service_classpath=D:\oracle\oraic\integration\interconnect\lib\oai.jar; D:\oracle\oraic\jdbc\classes12.zip

service_jdk_dll

Specifies the Dynamic Link Library(DLL) that the adapter JVM should use.

Possible value: A valid jvm.dll

Default value: jvm.dll

This parameter is only for Microsoft Windows.

service_jdk_dll=jvm.dll

service_jdk_version

Specifies the JDK version that the adapter JVM should use.

Possible value: A valid JDK version number

Default value: 1.4

This parameter is only for Microsoft Windows.

service_jdk_version=1.4

service_max_heap_size

Specifies the maximum heap size for the adapter JVM.

Possible value: A valid JVM heap size

Default value: 536870912

This parameter is only for Microsoft Windows.

service_max_heap_size=536870912

service_max_java_stack_size

Specifies the maximum size to which the JVM stack can grow.

Possible value: A valid JVM maximum stack size

Default value: Default value for the JVM

This parameter is only for Microsoft Windows.

service_max_java_stack_size=409600

service_max_native_stack_size

Specifies the maximum size to which the JVM native stack can grow.

Possible value: The valid JVM maximum native stack size

Default value: Default value for the JVM

This parameter is only for Microsoft Windows.

service_max_native_size=131072

service_min_heap_size

Specifies the minimum heap size for the adapter JVM.

Possible value: The valid JVM heap size

Default value: 536870912

This parameter is only for Microsoft Windows.

service_min_heap_size=536870912

service_num_vm_args

Specifies the number of service_vm_argnumber parameters specified in JVM.

Possible value: The number of service_vm_argnumber parameters

Default value: None

This parameter is only for Microsoft Windows.

service_num_vm_args=1

service_path

Specifies the environment variable PATH. The PATH variable is set before starting the Java Virtual Machine (JVM). Typically, list all directories that contain necessary DLLs.

Possible value: The valid PATH environment variable setting

Default value: None

This parameter is only for Microsoft Windows.

service_path=%JREHOME%\bin;D:\oracle\oraic\bin

service_vm_argnumber

Specifies any additional arguments to the JVM. For example, to retrieve line numbers in any stack traces, set service_vm_arg1=java.compiler=NONE. If a list of arguments exists, then use multiple parameters as shown in the example, by incrementing the last digit by 1.

Possible value: A valid JVM arguments

Default value: None

This parameter is only for Microsoft Windows.

service_vm_arg1=java.compiler= NONE

service_vm_arg2=oai.adapter=.aq


Table 2-8 shows the reserved characters used to specify the value of the nls_date_format parameter. Use the characters to define date formats.

Table 2-8 Reserved Characters for the nls_date_format Parameter

Letter Description Example

G

Era designator

AD

y

Year

1996 or 96

M

Month in year

July or Jul or 07

w

Week in year

27

W

Week in month

2

D

Day in year

189

d

Day in month

10

F

Day of week in month

Number 2

E

Day in week

Tuesday or Tue

a

a.m./p.m. marker

P.M.

H

Hour in day (0-23)

0

k

Hour in day (1-24)

24

K

Hour in a.m./p.m. (0-11)

0

h

Hour in a.m./p.m. (1-12)

12

m

Minute in hour

30

s

Second in minute

55

S

Millisecond

978


OA Adapter-specific Parameters

Table 2-9 lists the parameters specific to the OA adapter.

Table 2-9 OA Adapter-specific Parameters

Parameter Description Example

bridge_class

Specifies the entry class for the OA adapter. The value cannot be modified later.

Default value: oracle.oai.agent.adapter.ebs.EBSBridge

bridge_class=oracle.oai.agent.adapter.ebs. EBSBridge

ebs_aq_bridge_consumer_name

If all the queues that this adapter will connect to on the application database side are single consumer queues, this can be left blank. If, however, any of the queues is a multiconsumer queue, then specify a consumer name.

Possible value: ebs_bridge_username

Default value: None

ebs_aq_bridge_consumer_name=ebsuser

ebs_aq_bridge_owner

Specifies application (spoke) database queue (applicable for XML Gateway, WF Queue, and Custom Queue only).

Default value: None

ebs_aq_bridge_owner=apps

ebs_bridge_schema_host

Specifies the name of the computer hosting the database instance.

Possible value: The name of the computer hosting the database

Default value: None

ebs_bridge_schema_host=dlsun4255

ebs_bridge_schema_instance

Specifies the SID of the database instance.

Default value: Non.

ebs_bridge_schema_instance=oaimain

ebs_bridge_schema_num_readers

Specifies the number of database readers corresponding to the schema number. This is the same as the number of reader threads and each thread has its own database session.

Possible values: An integer greater than 0

Default value: None

ebs_bridge_schema_num_readers=1

ebs_bridge_schema_num_writers

Specifies the number of database writers corresponding to the schema number. This is same as the number of writer threads and each thread has its own database session.

Possible values: An integer greater than 0

Default value: None

ebs_bridge_schema_num_writers=1

ebs_bridge_schema_password

Specifies the password for the user in the ebs_bridge_schemaschema#_username.

Possible value: The password for the corresponding database user

Default value: None

Note: All passwords are stored in Oracle Wallet. Refer to AppendixA, "How do I secure my passwords?" in Appendix A, "Frequently Asked Questions" for more details on how to modify and retrieve the password using Oracle Wallet.

ebs_bridge_schema1_password=oai

encrypted_ebs_bridge_schema1_password=112511011064109110871093

ebs_bridge_schema_port

Specifies the port where the TNS listener is running for the database instance.

Possible value: A valid TNS listener port number

Default value: None

ebs_bridge_schema_port=1521

ebs_bridge_schema_username

Specifies the user name for the schema number schema#. The values for the schema number are 1 through ebs_bridge_num_schemas. This value should not be modified.

Possible values: A valid database user name

Default value: None

ebs_bridge_schema1_username=oai

ebs_bridge_schema_writer_password

Specifies the password corresponding to the database.

Default value: None

ebs_bridge_schema_writer_password=apps

ebs_bridge_schema_writer_use_oracle_objects

Specifies whether to use Oracle Objects, available in Oracle8i and later releases.

Possible values: true or false

The default value is false.

ebs_bridge_schema1_writer_use_oracle_objects=true

ebs_bridge_schema_writer_username

Specifies the user name to be used by this writer to log on to the database.

Default value: None

ebs_bridge_schema_writer_username=apps

ebs_bridge_sql_trace

Specifies whether to turn sql tracing on for the APPS database.

Possible values: true or false

Default value: false

ebs_bridge_sql_trace =true

ebs_bridge_use_thin_jdbc

Specifies whether to use a thin JDBC driver when talking to the APPS database.

Possible values: true or false

Default value: true

EBS_bridge_thin_jdbc=true