| Oracle® Database Client Installation Guide 10g Release 2 (10.2) for Microsoft Windows (32-Bit) Part Number B14312-02 |
|
|
View PDF |
| Oracle® Database Client Installation Guide 10g Release 2 (10.2) for Microsoft Windows (32-Bit) Part Number B14312-02 |
|
|
View PDF |
This chapter describes the following tasks that you must complete before you can install the Oracle Database Client products:
Table 2-1 lists the required hardware components for Oracle Database Client.
Table 2-1 Hardware Requirements
| Requirement | Minimum Value |
|---|---|
|
Physical memory (RAM) |
256 MB minimum, 512 MB recommended |
|
Virtual memory |
Double the amount of RAM |
|
Hard disk space |
Total ranges from 216–738 MB. See Table 2-2 for details. |
|
Video adapter |
256 colors |
|
Processor |
550 MHz minimum |
This section lists system requirements for Windows platforms that use the NT File System (NTFS) file systems. FAT32 space requirements are slightly larger. Oracle recommends installing Oracle components on NTFS.
The NTFS system requirements listed in this section are more accurate than the hard disk values reported by the Oracle Universal Installer Summary window. The Summary window does not include the space required to create a database or the size of compressed files that are expanded on the hard drive.
The hard disk requirements for Oracle Database Client components include space required to install Java Runtime Environment (JRE) and Oracle Universal Installer on the partition where the operating system is installed. If sufficient space is not detected, then installation fails and an error message appears.
Table 2-2 lists the space requirements for NTFS.
Table 2-2 Disk Space Requirements for NTFS
| Installation Type | TEMP Space | SYSTEM_DRIVE:\Program Files\Oracle\Inventory | Oracle Home | Total |
|---|---|---|---|---|
|
100 MB |
0.08 MB |
115 MB |
216 MB |
|
|
100 MB |
0.75 MB |
637 MB |
738 MB |
|
|
100 MB |
0.33 MB |
273 MB |
374 MB |
|
|
Custom (all components installed) |
100 MB |
0.75 MB * |
532 MB * |
633 MB * |
* This size varies, depending on the on the installation components selected.
|
Note: If you want to configure only the Instant Client Light component of Instant Client, you need 30–32 MB of disk space to store the related files. Refer to "Configuring Instant Client Light" for more information. |
|
See Also: "NTFS File System and Windows Registry Permissions" in Oracle Database Platform Guide for Microsoft Windows (32-Bit) |
To ensure that the system meets these requirements, follow these steps:
Determine the physical RAM size. For a computer using Windows 2003, for example, open System in the Windows Control Panel and select the General tab. If the size of the physical RAM installed in the system is less than the required size, then you must install more memory before continuing.
Determine the size of the configured virtual memory (also known as paging file size). For a computer using Windows 2003, for example, open System in the Control Panel, select the Advanced tab, and click Settings in the Performance section. Then select the Advanced tab. The virtual memory is listed in the Virtual Memory section.
If necessary, see your operating system documentation for information about how to configure additional virtual memory.
Determine the amount of free disk space on the system. For a computer using Windows 2003, for example, open My Computer, right-click the drive where the Oracle software is to be installed, and choose Properties.
Determine the amount of disk space available in the temp directory. This is equivalent to the total amount of free disk space, minus what will be needed for the Oracle software to be installed.
If there is less than 100 MB of disk space available in the temp directory, then first delete all unnecessary files. If the temp disk space is still less than 100 MB, then set the TEMP or TMP environment variable to point to a different hard drive. For a computer using Windows 2003, for example, open System in the Control Panel, select the Advanced tab, and click Environment Variables.
This section covers the following topics:
Table 2-3 lists the software requirements for Oracle Database Client.
Table 2-3 Software Requirements
| Requirement | Value |
|---|---|
|
System Architecture |
Processor: Intel (x86), AMD64, and Intel EM64T Note: Oracle provides 32-bit (x86), 64-bit (Itanium), and 64-bit (x64) versions of Oracle Database for Windows. The 32-bit database version, which this installation guide describes, runs on the 32-bit version of Windows on either x86 or x64 hardware. Oracle provides limited certification for 32-bit Oracle Database on 64-bit Windows (x64). For additional information, visit Oracle MetaLink at: http://metalink.oracle.com |
|
Operating System |
Oracle Database for Windows is supported on the following operating systems:
Windows NT is not supported. Windows Multilingual User Interface Pack is supported on Windows XP Professional and Windows Server 2003. |
|
Compiler |
Pro*Cobol has been tested and certified with the following two compilers:
Object Oriented COBOL (OOCOBOL) specifications are not supported. The following components are supported with the Microsoft Visual C++ .NET 2002 7.0 and Microsoft Visual C++ .NET 2003 7.1 compilers:
If you plan to use GNU Compiler Collection as your primary compiler, see Oracle Database Installation Guide for Microsoft Windows (32-Bit) for instructions on configuring the primary compiler. |
|
Network Protocol |
The Oracle Net foundation layer uses Oracle protocol support to communicate with the following industry-standard network protocols:
|
In addition to the requirements described in the previous section, if you plan to use Instant Client Light, your applications must use the following languages and character sets:
Language: US English
Territory: Any territory that is supported by Oracle
Character sets:
Single byte
US7ASCII
WE8DEC
Unicode
UTF8
AL16UTF16
AL32UTF8
The language, territory, and character sets are determined by the NLS_LANG parameter, which is stored in the registry under the HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\HOMEID\NLS_LANG subkey, where ID is the unique number identifying the Oracle home.
|
See Also: Appendix C, " Configuring Oracle Database Client Globalization Support" for more information onNLS_LANG |
The platform-specific hardware and software requirements included in this installation guide were current at the time this guide was published. However, because new platforms and operating system software versions might be certified after this guide is published, review the certification matrix on the OracleMetaLink Web site for the most up-to-date list of certified hardware platforms and operating system versions. This Web site also provides compatible client an database versions, patches, and workaround information for bugs. The OracleMetaLink Web site is available at the following URL:
You must register online before using OracleMetaLink. After logging in, select Certify & Availability from the left-hand column. From the Product Lifecycle page, select the Certifications button. Other Product Lifecycle options include Product Availability, Desupport Notices, and Alerts.
The following sections list the following certification information:
Windows 2000, Windows 2003, and Windows XP include a Telnet Service that allows remote users to log on to the operating system and run console programs using the command line. Oracle supports database command line utilities such as sqlplus, sqlldr, import, and export using this feature, but does not support the database GUI tools such as Oracle Universal Installer and Oracle Net Configuration Assistant.
|
Note: Make sure that the Telnet service is started on the Windows Services utility. |
Oracle supports installing, configuring, and running Oracle Database Client through Terminal Services on Windows 2000, Windows 2003, and Windows XP. If you encounter problems with the installation through Terminal Server, Oracle recommends connecting to the Terminal Services console session of the server (using mstsc\console).
For Windows 2000, Oracle supports installing, configuring, and running Oracle Database Client from a remote Terminal Services Client. For Windows XP, the Remote Desktop is only avialable in Single User Mode.
|
See Also:
|
Oracle Database ships several Snap-Ins for the Microsoft Management Console (MMC). These Snap-ins require MMC version 1.2 or later.
Install Internet Explorer version 6.0 (IE 5.0) or later before installing Oracle Snap-ins. If you install any Oracle Snap-ins before installing IE 6.0, then reinstall the Oracle Snap-ins.
The following components depend on Oracle Snap-In components:
Oracle Administration Assistant for Windows
Oracle Counters for Windows Performance Monitor
|
Note: Installing Oracle Administration Assistant for Windows automatically installs each Oracle Snap-In component. |
You can download the Microsoft Management Console add-on from the following Web site:
