Oracle® Application Server Reports Services Publishing Reports to the Web
10g Release 2 (10.1.2) B14048-02 |
|
Previous |
Next |
Environment variables are parameters that configure the Oracle Reports environment. The Oracle Application Server installer automatically defines default values for relevant environment variables. Edit the environment variable settings to change the default behavior:
On Windows, edit the environment variables through the Registry Editor (Start > Run > Regedit).
On UNIX, edit the environment variables by revising and running the shell script that defines the initial default values (reports.sh
). If you do this, keep a backup of the original, unaltered reports.sh
file.
Note: Thereports.sh file in Oracle Reports 10g Release 2 (10.1.2) may contain some required changes for the release. Thus, if you have made any changes to the reports.sh file in prior releases, save a backup before you perform your upgrade. Post-upgrade, merge your modifications with the reports.sh file installed with Oracle Reports 10g Release 2 (10.1.2).
|
The information in this appendix is also documented in the Oracle Reports online Help, which is available in Reports Builder or hosted on the Oracle Technology Network (OTN), as described in the Preface under "Related Documentation".
Table B-1 provides an alphabetical summary list of all the Oracle Reports environment variables alphabetically, showing valid and default value.
For more information on all globalization support environment variables, see the Oracle Application Server Globalization Guide on the Oracle Technology Network, (http://www.oracle.com/technology/index.html
). Also refer to Chapter 18, "Implementing Globalization and Bidirectional Support".
The environment variables shown in italics are supported in Oracle Reports for backward compatibility for Common Gateway Interface (CGI) reports, or when Single Sign-On is not used.
Note: The functionality of JavaServer Pages (JSPs) or servlets replaces support for CGI. |
Table B-1 provides an alphabetical summary list of all the Oracle Reports environment variables alphabetically, showing valid and default value.
Table B-1 Oracle Reports Environment Variables
Kewords | Valid Values | Default |
---|---|---|
|
Any directory on any drive |
|
|
|
|
|
|
|
|
Any directory on any drive |
|
|
See Chapter 18, "Implementing Globalization and Bidirectional Support" |
See Chapter 18, "Implementing Globalization and Bidirectional Support" |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AMERICAN_AMERICA.WE8ISO8859P1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
Any directory on any drive |
Not defined |
|
Any directory on any drive |
|
|
Any directory on any drive |
Not defined |
|
Any directory on any drive |
Not defined |
|
Any directory on any drive |
Not defined |
|
Any directory on any drive |
Not defined |
|
Any directory on any drive |
Not defined |
|
Name of default printer |
Not defined |
|
Any valid SQL* Net driver prefix and parameters |
Not defined |
|
|
|
|
|
|
|
|
|
|
Any valid HTML attributes for the |
Not defined |
|
Any HTML tags that are valid between |
Not defined |
|
Any valid URL to a Web page or a HTML file. |
A default help screen is displayed in the browser. |
|
A valid path to the map file. |
|
|
|
|
|
The default values are mandatory. If any of the entries are removed, the Oracle Reports executables may not behave correctly. Any additional user-defined directory or JAR file that contains Java Classes may be appended to the path. |
|
|
|
|
|
Any number of minutes |
30 |
|
Any HTML file that contains special authentication actions. It is recommended that you keep the default. |
|
|
|
|
|
Any value ranging from 72 through 200. |
Surface resolution determined by Oracle Reports. |
|
|
|
|
Any encryption key. |
|
|
|
|
|
|
72 |
|
|
|
|
|
|
|
List of JVM options in the JVM command line syntax. |
|
|
Valid custom network configuration file name in |
|
|
Set of mapping pairs separated by semicolons. The first value is the encoding that is being produced and the second mapped value is the value that should be used for these cases.
|
Not defined. |
|
|
|
|
|
not set |
|
|
|
|
Any directory on any drive. |
|
|
Any directory on any drive. |
|
|
Any Reports Server service entry name. |
|
|
|
|
|
|
|
|
|
not set |
|
Any valid port number. |
443 |
|
Any HTML file that contains special authentication actions. It is recommended that you keep the default. |
|
|
Any "uri" that references the Oracle Reports tag library. |
|
|
Any directory on any drive. |
Not defined. |
|
Any user exit dynamic link library (along with its absolute path). |
Not defined. |
|
|
|
|
A valid directory name. |
|
|
The PRINT command and all necessary keywords for your flavor of UNIX, including the following elements:
This string is much like a System V: Solaris: |
Not defined. |
|
Should include If this environment variable is not set, Oracle Reports uses the built-in default values: System V: Other: |
Not defined. |
|
Name of default printer. |
Not defined. |
|
Any directory on any drive. |
Not defined. |
|
Any directory on any drive. |
Not defined. |
|
Any directory on any drive. |
Not defined. |
|
Any directory on any drive. |
Not defined. |
|
Any valid Oracle username (without the |
Not defined. |
|
|
|
Description This environment variable specifies the location of the global preferences file, CAGPREFS.ORA
. Global preferences are shared among networked users. In addition to searching the directory specified by CA_GPREFS
, products will also search the current directory for the CAGPREFS.ORA
file.
The CAGPREFS.ORA
file is automatically created by the Oracle Installer. To modify the global preference settings, use a text editor such as Notepad to manually edit this file. Global preferences set in the CAGPREFS.ORA
file can be overridden by the local preference file, CAUPREFS.ORA
, which is defined by CA_UPREFS
.
Valid Values Any directory on any drive.
Default ORACLE_HOME
Example CA_GPREFS=C:\orawin
Description This environment variable specifies the location of the user preferences file, CAUPREFS.ORA
. The CAUPREFS.ORA
file maintains the preferences that you set through Tools >Tools Options within your products. In addition to searching the directory specified by CA_UPREFS
, the product will also search the current directory for the CAUPREFS.ORA
file.
Several Oracle products write their preference information to the CAUPREFS.ORA
file. To manually modify the user preference settings, use a text editor such as Notepad to edit this file. User preferences set in the CAUPREFS.ORA
file override global preferences set in the CAGPREFS.ORA
file, which is defined by CA_GPREFS
.
Valid Values Any directory on any drive.
Default ORACLE_HOME
Example CA_UPREFS=C:\orawin
Description This environment variable specifies whether to print the delimited character at the end of the line for delimited output.
Valid Values YES|NO
Default YES
Usage Notes
Set this environment variable to NO
to ensure that the delimited character is not printed at the end of the line.
Description This environment variable specifies the location of the online documentation files, including online Help.
Valid Values Any directory on any drive.
Default ORACLE_HOME
\tools\doc
Example DOC=C:\myreports_1012\tools\doc
Description This environment variable specifies the language for the report. Chapter 18, "Implementing Globalization and Bidirectional Support" contains additional detailed information about this environment variable, including a table of valid values.
Description This environment variable specifies the string used to indicate a positive monetary value.
Description This environment variable specifies the default format used for dates.
Description This environment variable specifies the default language used for dates.
Description This environment variable specifies the string used to indicate a negative monetary value.
Description This environment variable specifies the language, settings used, including:
The language used to display messages to the user, for example the 'Working...' message.
The default format masks used for dates and numbers.
The sorting sequence.
The characters that make up the character set.
Chapter 18, "Implementing Globalization and Bidirectional Support" contains additional detailed information about this environment variable, including a table of valid values.
Syntax NLS_LANG=
language_territory
:
charset
Valid Values
language
Specifies the language and its conventions for displaying messages and day and month names.
territory
Specifies the territory and its conventions for calculating week and day numbers.
charset
Specifies the character set used for the UPPER
, LOWER
, and INITCAP
functions, and the type of sort used by an ORDER BY
query. This argument also controls the character set used for displaying messages.
Also see the Oracle Application Server Globalization Guide on the Oracle Technology Network (http://www.oracle.com/technology/index.html
).
Default AMERICAN_AMERICA.WE8ISO8859P1
Usage Notes
To change locales, you must modify this environment variable, in addition to the REPORTS_RESOURCE environment variable.
Examples Suppose you want your application to run in French. The application will be used in France and data will be displayed using the WE8ISO8895P1
character set. You would set NLS_LANG
as follows:
NLS_LANG=French_France.WE8ISO8895P1
Now, suppose you still want your application to run in French, but this time it will be used in Switzerland. You would set NLS_LANG
as follows:
NLS_LANG=French_Switzerland.WE8ISO8895P1
More examples:
NLS_LANG=Norwegian_Norway.NDK7DE
C
NLS_LANG=Norwegian_Norway.WE8ISO8895P1
NLS_LANG=Japanese_Japan.JA16SJIS
NLS_LANG=Arabic_Egypt.AR8MSWIN1256
NLS_LANG=American_America.AR8MSWIN1256NLS_LANG=American_America.WE8ISO8859P1
Description This environment variable specifies the character used to separate items in a list.
Description This environment variable specifies the decimal character and thousands separator for monetary values.
Description This environment variable specifies the decimal character and grouping separator for numeric values.
Description This environment variable specifies the type of sort used for character data.
Description This environment variable specifies the location of AFM files. TK_AFM is considered first, then ORACLE_AFM
.
Valid Values Any directory on any drive.
Default Not defined.
Usage Notes
If you do not specify values for either of these variables, Oracle Reports looks for AFM files in:
ORACLE_HOME/guicommon/tk/admin/AFM
Printing on UNIX requires some setup and configuration to create the proper printing environment. For detailed information, refer to Chapter 5, "Printing on UNIX with Oracle Reports".
Description This environment variable specifies the home directory in which Windows Oracle products are installed. This directory is the top directory in the Oracle directory hierarchy.
Valid Values Any directory on any drive.
Default C:\orawin
Usage Notes
If you are using Reports Runtime (rwrun
), the combined length of ORACLE_HOME
and ORACLE_PATH should not exceed 255 characters.
Example ORACLE_HOME=C:\orawin
Description This environment variable specifies the location of HPD files.
TK_HPD is considered first, then ORACLE_HPD
.
Valid Values Any directory on any drive.
Default Not defined.
Usage Notes
If you do not specify values for either these variables, Oracle Reports looks for HPD files in:
ORACLE_HOME/guicommon/tk/admin/HPD
Printing on UNIX requires some setup and configuration to create the proper printing environment. For detailed information, refer to Chapter 5, "Printing on UNIX with Oracle Reports".
Description This environment variable specifies the search path for files referenced by Reports Runtime. Note that the directories specified by ORACLE_PATH
are searched after those specified by REPORTS_PATH.
ORACLE_PATH
can specify multiple directories. Use a semi-colon (;) to separate directory names in a list of paths.
Valid Values Any directory on any drive.
Default Not defined.
Usage Notes
If you are using Reports Runtime(rwrun)
, the combined length of ORACLE_HOME and ORACLE_PATH
should not exceed 255 characters.
Example ORACLE_PATH=C:\oracle\apps\forms;C:\oracle\apps\reports
Description This environment variable specifies the location of PPD files. TK_PPD is considered first, then ORACLE_PPD
.
Valid Values Any directory on any drive.
Default Not defined.
Usage notes
If you do not specify values for either of these variables, Oracle Reports looks for PPD files in:
ORACLE_HOME/guicommon/tk/admin/PPD
Printing on UNIX requires some setup and configuration to create the proper printing environment. For detailed information, refer to Chapter 5, "Printing on UNIX with Oracle Reports".
Description This environment variable specifies the location of TFM files. TK_TFM is considered first, then ORACLE_TFM
.
Valid Values Any directory on any drive.
Default Not defined.
Usage notes
If you do not specify values for either of these variables, Oracle Reports looks for TFM files in
ORACLE_HOME/guicommon/tk/admin/TFM
Printing on UNIX requires some setup and configuration to create the proper printing environment. For information about printing on UNIX with Oracle Reports, refer to Chapter 5, "Printing on UNIX with Oracle Reports".
Description This environment variable specifies the location of the table of contents and index for your online documentation.
Valid Values Any directory on any drive.
Default Not defined.
Example ORAINFONAV_DOCPATH=C:\orawin\oin
Description This environment variable specifies the default printer's name.
Valid Values Name of default printer
Default Not defined.
Usage Notes
TK_PRINTER takes precedence over PRINTER
; that is, if both variables are set, TK_PRINTER
is considered first and PRINTER
is considered only if TK_PRINTER
does not specify a valid printer. If neither TK_PRINTER
nor PRINTER
is set to a valid printer, Oracle Reports uses the first entry in your uiprint.txt
file. If REPORTS_NO_DUMMY_PRINTER
is set, but the uiprint.txt
file does not contain a valid entry, then screenprinter.ppd
specified in uiscreenprint.txt
is used.
Note: REPORTS_NO_DUMMY_PRINTER is set by default and is required to be set at all times. If it is not set (as a result of being user-modified), then the REP-1800 error is raised.
|
See Also: Section 3.10.1, "ScreenPrinter" for more information on the PostScript printer driver,screenprinter.ppd .
|
Printing on UNIX requires some setup and configuration to create the proper printing environment. For detailed information, refer to Chapter 5, "Printing on UNIX with Oracle Reports".
Description This environment variable specifies the default and remote SQL*Net driver to use when connecting through a local database. The parameter can include the default SQL*Net parameters (complete database string).
If a user logs on and specifies a connection with an explicit driver prefix matching the one specified in REMOTE
, but specifies no SQL*Net parameters, the parameters specified in REMOTE
are used. This parameter enables the DBA to define a "normal" network connection for which the SQL*Net user need not specify connection parameters. You can reset this parameter on the command line at any time.
Note: If you use a DOS SQL*Net driver for Windows, check to see whether theREMOTE parameter is set in your CONFIG.ORA file located in the DOS Oracle home directory. If REMOTE is set in CONFIG.ORA , you must set it to the same value in the registry.
|
Syntax REMOTE=
netPrefix
:
databaseName
Valid Values
netPrefix
Any valid SQL*Net driver prefix.
databaseName
The name of the local database.
Default Not defined.
Example REMOTE=P:PIPER
where
P
: is the network prefix for Named Pipes
PIPER
is the database name
Description (Windows only) This environment variable specifies whether to include the printer hardware-based left margin. By default, this margin is ignored. The printing origin starts from the top-left corner (0,0) of the physical paper and not the printable area. This is to facilitate the design of of reports independent of the printer hardware margin. These reports can then be deployed across various printers.
In the past, the printer's printable area was used, causing inconsistencies in the location of the report output when moving across different printer models.
If required, you can revert to the previous behavior by setting the registry variable REPORTS_ADD_HWMARGIN
to YES
.
To set the REPORTS_ADD_HWMARGIN
registry variable:
Edit the Windows registry using a registry editor (for example, regedit.exe
).
Note: Before you edit the registry, back it up. |
Navigate to the following key:
HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\HOMEn
where n is the number of the ORACLE_HOME
containing the installation.
Add a new String value named REPORTS_ADD_HWMARGIN
and set the value to YES
.
Valid Values YES|NO
Default NO
Usage Note
When printing reports without hardware-based left margins on Windows, you must ensure that your report's layout contains enough margin spacing such that your data falls within the printable area. Margin fields in the Page Setup dialog box of Reports Builder have been disabled to ensure consistency with OracleAS Reports Services.
Description This environment variable specifies the numeric format for Arabic PDF output. Valid values for this environment are: ARABIC
(Arabic numerals), HINDI
(Hindi numerals), or CONTEXT
(Arabic or Hindi depending on the context). This environment variable is case insensitive.
Valid Values ARABIC|HINDI|CONTEXT
Default ARABIC
(Indo-Arabic)
Description This environment variable switches the bidirectional (BiDi) layout algorithm for BiDi languages (for example, Arabic or Hebrew). This environment variable is case insensitive.
Valid Values
ORACLE
Oracle Reports follows the Oracle BiDi algorithm.
UNICODE
Oracle Reports follows the Unicode BiDi algorithm.
Refer to http://www.unicode.org/reports/tr9/
for more information on the Unicode BiDi algorithm.
Default ORACLE
Description This environment variable specifies the HTML attributes to add to the <BODY>
tag in the rwcgi
diagnostic and debugging output. For example, you can use this environment variable to set up text and background color or image.
This environment variable is backward compatible.
Valid Values Any valid HTML attributes for the <BODY>
tag.
Default Not defined.
Usage Notes
This environment variable is supported in Oracle Reports for backward compatibility for Common Gateway Interface (CGI) reports, or when Single Sign-On is not used.
Note: The functionality of JavaServer Pages (JSPs) or servlets replaces support for CGI. |
Example REPORTS_CGIDIAGBODYTAGS="bgcolor="#CC3366""
Description This environment variable specifies the HTML tags to insert between the <HEAD> and </HEAD> tags in the rwcgi
diagnostic and debugging output. For example, you can use this environment variable to set up <TITLE> or <META> tags.
Valid Values Any HTML tags that are valid between the <HEAD> and </HEAD> tags.
Default Not defined.
Usage Notes
This environment variable is supported in Oracle Reports for backward compatibility for Common Gateway Interface (CGI) reports, or when Single Sign-On is not used.
Note: The functionality of JavaServer Pages (JSPs) or servlets replaces support for CGI. |
Example REPORTS_CGIDIAGHEADTAGS="<title>Employee List</title>"
Description This environment variable specifies the URL and URI of the rwcgi
help file that should display when rwcgi
is invoked with the following empty request:
This environment variable is backward compatible.
http://your_webserver/rwcgi?
Valid Values Any valid URL to a Web page or HTML file.
Default A default help screen is displayed in your browser.
Usage Notes
This environment variable is supported in Oracle Reports for backward compatibility for Common Gateway Interface (CGI) reports, or when Single Sign-On is not used.
Note: The functionality of JavaServer Pages (JSPs) or servlets replaces support for CGI. |
Examples
To display the www.yahoo.com
page in your browser:
REPORTS_CGIHELP=http://www.yahoo.com
To display an HTML file named myhelpfile.htm
in your browser:
REPORTS_CGIHELP=http://your_webserver/myhelpfile.htm
Description This environment variable specifies the fully qualified file name and location of the rwcgi
map file, if map file configuration is used.
This environment variable is backward compatible.
Valid Values A valid path to the map file.
Default ORACLE_HOME
\reports\conf\cgicmd.dat
Usage Notes
This environment variable is supported in Oracle Reports for backward compatibility for Common Gateway Interface (CGI) reports, or when Single Sign-On is not used.
Note: The functionality of JavaServer Pages (JSPs) or servlets replaces support for CGI. |
Example REPORTS_CGIMAP=c:\orawin\reports\conf\cgicmd.dat
Description This environment variable specifies whether to disable all debugging and diagnostic output, such as help
and showmap
, from rwcgi
.
This environment variable is backward compatible.
Valid Values YES|NO
Default NO
Usage Notes
This environment variable is supported in Oracle Reports for backward compatibility for Common Gateway Interface (CGI) reports, or when Single Sign-On is not used.
Note: The functionality of JavaServer Pages (JSPs) or servlets replaces support for CGI. |
Example The following request does not work when REPORTS_CGINODIAG=YES
:
http://your_webserver/rwcgi/help?
Description This environment variable specifies the list of JAR files and directories for the Java Virtual Machine (JVM) when started by the Oracle Reports executables. You would typically add to this list when you need to include your own classes when designing reports (for example, when adding additional pluggable data sources (PDSs) or using the PL/SQL to Java bridge).
Caution: Reports Builder will fail if the value of theREPORTS_CLASSPATH environment variable (registry) exceeds 511 characters. To work around this issue, you can use the CLASSPATH environment variable (system) to specify a value in excess of 511 characters.
|
Valid Values The default values are mandatory. If any of the entries are removed, the Oracle Reports executables may not behave correctly. Any additional user-defined directory or JAR file that contains Java Classes may be appended to the path.
Default %ORACLE_HOME%\reports\jlib\rwbuilder.jar;%ORACLE_HOME%\reports\jlib\rwrun.jar;%ORACLE_HOME%\jlib\zrclient.jar;%ORACLE_HOME%\j2ee\home\oc4j.jar;%ORACLE_HOME%\j2ee\home\lib\ojsp.jar
Usage Notes
The default value for the environment variable is required for Oracle Reports executables to function correctly. Additional user classes may be appended, but the list must conform to the platform-specific Java CLASSPATH
definition.
Example
REPORTS_CLASSPATH=%ORACLE_HOME%\reports\jlib\rwbuilder.jar; %ORACLE_HOME%\reports\jlib\rwrun.jar;%ORACLE_HOME%\jlib\zrclient.jar;%ORACLE_HOME%\j2ee\home\oc4j.jar;%ORACLE_HOME%\j2ee\home\lib\ojsp.jar
Reports Builder will fail if the value of the REPORTS_CLASSPATH
environment variable (registry) exceeds 511 characters. To work around this issue, you can use the CLASSPATH
environment variable (system) to specify a value in excess of 511 characters.
Description This environment variable specifies whether Oracle Reports interprets the HTML formatting tags for all the supported output formats.
Note: Oracle Reports' interpretation of inline HTML tags may be different from the browser's interpretation. As a result, a report designed with inline HTML tags in Oracle Reports 6i, Oracle9i Reports, or Oracle Reports 10g Release 1 (9.0.4) may generate a different HTML or HTMLCSS output in Oracle Reports 10g Release 2 (10.1.2). |
Valid Values
YES
Oracle Reports interprets the HTML tags for those objects whose Contains HTML Tags property is set to Yes.
NO
Oracle Reports does not interpret the HTML tags for the report, regardless of the object's Contains HTML Tags property setting. For HTML and HTMLCSS ouput, the browser will interpret the HTML formatting tags; for other output formats, the HTML tags themselves will appear as is in the report output. Set this environment variable to NO
if you do not wish for Oracle Reports to interpret HTML formatting tags, and thus retain the behavior of prior releases.
See Also: Section A.3.16, "CONTAINSHTMLTAGS" for more information on the implementation of inline HTML formatting tags. |
Default YES
Usage Note
The command line keyword CONTAINSHTMLTAGS
overrides the value of this environment variable.
Description This environment variable specifies the lifetime of a cookie within a given Reports Server session.
If Single Sign-On is not being used, then any user accessing a secured instance of the Reports Server is challenged to identify themselves by rwservlet
through its own authentication mechanism (identical to the behavior of Oracle Reports 6i). Because the HTTP 1.0 protocol is stateless (that is, each call to the server is effectively independent of all others), users might need to authenticate themselves for each report request unless a cookie is maintained.
To allow users to authenticate themselves only once per session, rwservlet
has its own client-side cookie, the authid
cookie, in which it stores the required authentication information for the current session. Once the user is authenticated, an encrypted cookie is created in the browser to enable the user to submit multiple report jobs without re-authenticating for each request. The authid
cookies are terminated when the user closes their browser session, but you should not rely strictly on this method of terminating the cookie. You should limit the lifetime of the cookie within a given session using the REPORTS_COOKIE_EXPIRE
environment variable. For example, a user might log on and then go to lunch, leaving the browser session open. To minimize the potential for a security breach in this situation, the administrator may define the REPORTS_COOKIE_EXPIRE
environment variable on the Reports Server. When rwservlet
receives a job request, it compares the time saved in the cookie with the current system time. If the time is longer than the number of minutes defined in the environment variable (for example, 30 minutes), the cookie is rejected and the user is challenged to provide authentication information.
Note: If you want to force users to authenticate themselves for a specific report, you can use theSHOWAUTH command line keyword. Alternatively, you can include a %S in the corresponding report entry in the key map file. This file is usually called cgicmd.dat and is located in ORACLE_HOME \reports\conf . %S forces users to enter their user name and password each time the report is called.
|
Valid Values Any number of minutes.
Default 30
Usage Note
This environment variable is supported in Oracle Reports for backward compatibility for Common Gateway Interface (CGI) reports, or when Single Sign-On is not used.
Note: The functionality of JavaServer Pages (JSPs) or servlets replaces support for CGI. |
Example REPORTS_COOKIE_EXPIRE=30
Description This environment variable specifies the database authentication template used to log on to the database. This environment variable is backward compatible.
Valid Values Any HTML file that contains special authentication actions. It is recommended that you keep the default.
Default dbauth.htm
Usage Note
This environment variable is supported in Oracle Reports for backward compatibility for Common Gateway Interface (CGI) reports, or when Single Sign-On is not used.
Note: The functionality of JavaServer Pages (JSPs) or servlets replaces support for CGI. |
Example REPORTS_DB_AUTH=dbauth.htm
Description This environment variable specifies whether to implement the following features introduced with Oracle Reports 10g Release 1 (9.0.4):
The elimination of the dependency on the DISPLAY
variable (UNIX only)
Using ScreenPrinter (screenprinter.ppd
) for surface resolution for images and font information, which eliminates the dependency on having a valid printer defined (PRINTER
and TK_PRINTER
environment variables set to a valid printer, or a valid entry in uiprint.txt
) for Reports Runtime (UNIX only).
Advanced imaging support (all platforms)
Refer to Section 3.10.2, "Advanced Imaging Support" for more information.
Valid Values YES|NO
Default YES
Usage Notes
The Reports Server must be started in batch mode to suppress the UI.
REPORTS_DEFAULT_DISPLAY=YES
enables the enhanced imaging support introduced with the REPORTS_OUTPUTIMAGEFORMAT environment variable and OUTPUTIMAGEFORMAT
command line keyword. The surface resolution can be controlled with the entry in the screenprinter.ppd
file. If REPORTS_DEFAULT_DISPLAY=NO
, imaging support is limited to GIF format (for PDF output, HTML, HTMLCSS) and BMP format (for RTF output).
On UNIX, REPORTS_DEFAULT_DISPLAY=YES
overrides any value set for the DISPLAY
variable. Even if the DISPLAY
variable is defined, the X-Windows display surface will not be used by default. The surface resolution can be controlled with the entry in the screenprinter.ppd
. For users upgrading from releases prior to Oracle Reports 10g Release 1 (9.0.4), this change may impact the appearance, number of pages, output file size, or performance of existing reports.
This feature is not available on the IBM AIX platform due to lack of functionality in the IBM JDK 1.4 (does not support headless option). For this reason, the dependency on DISPLAY
still exists on AIX.
To revert to the dependency on DISPLAY
and use screen fonts (old font look up algorithm):
Set REPORTS_DEFAULT_DISPLAY=NO
Remove the screenprinter.ppd
entry in the uiscreenprint.txt
file.
Set the DISPLAY
variable to the active X-Windows display surface.
Printing on UNIX requires some setup and configuration to create the proper printing environment. For detailed information, refer to Chapter 5, "Printing on UNIX with Oracle Reports".
Description This environment variable specifies a pixel size that overrides the display server's default pixel size when generating a report to HTML output. Normally, Oracle Reports takes its pixel size from the display server. If you are working with older reports that rely upon a pixel size that is different from that of the display server (for example, a pixel size of 80), you can use this variable to maintain the same behavior in your older reports.
Valid Values Any value ranging from 72 through 200.
Default Surface resolution determined by Oracle Reports.
Usage Notes
For Windows, REPORTS_DEFAULT_PIXEL_SIZE
is set in the registry. For UNIX, it is set from the command prompt or in a shell script.
If REPORTS_DEFAULT_DISPLAY = YES
(default), Oracle Reports still uses the value specified for REPORTS_DEFAULT_PIXEL_SIZE
for HTML output. However, if a value is not explicitly set for REPORTS_DEFAULT_PIXEL_SIZE
, the surface resolution is can be controlled with the entry in the screenprinter.ppd
file, as described in Chapter 5, "Printing on UNIX with Oracle Reports".
This environment variable specifies whether to enable functionality that prevents truncation of multiline text in RTF output. This environment variable may not be needed in most circumstances, and should be set to YES
only if you see truncation of multiline text in RTF output.
Valid Values
YES
Oracle Reports enables functionality to prevent truncation of multiline text in RTF output.
NO
Oracle Reports does not enable functionality to prevent truncation of multiline text in RTF output. Truncation may occur.
Default NO
Description This environment variable specifies the encryption key used to encrypt the user name and password.
Valid Values Any encryption key
Default reports9i
Usage Note
This environment variable is supported in Oracle Reports for backward compatibility for Common Gateway Interface (CGI) reports, or when Single Sign-On is not used.
Note: The functionality of JavaServer Pages (JSPs) or servlets replaces support for CGI. |
Example REPORTS_ENCRYPTION_KEY=oraclereports10g
Description This environment variable specifies whether to include the enhanced TTF font subsetting feature when generating a report. This environment variable is set to YES
by default to ensure that the PDF file generated is accessible and searchable.
Valid Values YES|NO
Default YES
Usage Note
Oracle Reports uses the enhanced font subsetting implementation, by default. If you set REPORTS_ENHANCED_SUBSET=NO
, Oracle Reports will to revert to the Type 3 font subsetting implementation used in releases prior to Oracle Reports 10g Release 2 (10.1.2).
For more information on PDF font subsetting, refer to Section 6.1.2.2, "Font Subsetting".
Description This environment variable specifies a dots per inch (DPI) value for graphs output to a PDF file or a printer. The default value for this environment variable is set at 72 DPI to minimize the time taken to generate the report as well as to reduce the report file size.
If you specify a value higher than 72 DPI, you will see an improvement in the image resolution for graphs sent to a PDF file or a printer. However, this affects the time taken to generate the report output as well as the file size.
Note: With the value ofREPORTS_GRAPH_IMAGE_DPI=250 :
|
Valid Values 72
through 300
Default 72
Usage Notes
On Windows, use the registry to specify the value. On Unix/Linux, set the environment variable in reports.sh
.
When you set a higher DPI value, you may also need to change the JVM heap size value through REPORTS_JVM_OPTIONS to avoid the Out Of Memory
error for the JVM.
This environment variable is not supported in Oracle Reports distribution functionality, as it is specific to PDF and printer outputs only.
Description This environment variable is useful when a report includes certain image formats that have the ability to store the physical size of the image, which usually includes resolution and pixel dimensions. To ensure the image is not scaled to the physical dimensions, you can set this environment variable to YES
to specify that Oracle Reports should ignore image resolution information and only use the pixel dimensions of the image. This ensures that this type of image from a database column is displayed correctly instead of displaying as a thumbnail.
Valid Values
YES
Oracle Reports ignores image resolution information, and uses only the pixel dimensions of the image.
NO
Oracle Reports does not ignore the image resolution information in the image.
Default NO
Description This environment variable specifies the level of image quality desired for JPEG images. It provides control over the trade-off between JPEG image quality and size of the image. The better the quality of the image, the greater the image file size.
Valid Values 0
through 100
Default 100
(highest quality)
Usage Notes
On Windows, use the registry to specify the value. On Unix/Linux, set the environment variable in reports.sh
.
If REPORTS_JPEG_QUALITY_FACTOR
is not specified or incorrectly specified (for example, set to a string or an out of range value), the default value is used.
A value of 75
provide a good quality image, while ensuring a good compression ratio.
Description This environment variable specifies any JVM options that you want Reports Builder, Reports Runtime, or Reports Converter to consider when it starts its JVM. For example, you can use this environment variable to specify the starting heap size and maximum heap size for the JVM, additional classpath entries, and so on.
Valid Values List of JVM options in the JVM command line syntax.
Default -Xmx256M
Usage Notes
The default value -Xmx256M
specifies the JVM heap size of 256 MB to avoid the Out Of Memory
error when running reports with large graphs or running big reports.
When the Reports Engine starts up, it checks for JVM options specified in the server_name
.conf
file in the jvmoptions
attribute of the engine
element. For more information, see Section 3.2.1.4, "engine". If specified, the JVM options set in server_name
.conf
override the value of the REPORTS_JVM_OPTIONS
environment variable. If not specified in server_name
.conf
, Oracle Reports uses the JVM options specified by the REPORTS_JVM_OPTIONS
environment variable.
When running reports with Reports Server, JVM options cannot be set using the REPORTS_JVM_OPTIONS
environment variable. For Reports Server, set JVM options on the command line using the JVMOPTIONS command line keyword. For more information, see Section A.3.46, "JVMOPTIONS".
When running reports with Reports Builder, Reports Runtime, and Reports Converter, JVM options specified on the command line with the JVMOPTIONS command line keyword override JVM options specified by the REPORTS_JVM_OPTIONS
environment variable.
Description This environment variable should be set only if you want rwclient
, rwrqm
, rwcgi
, or OracleAS Forms Services to use a custom network configuration file. If this environment variable is not set, then these executables will use the default network configuration file (rwnetwork.conf
). For more information about rwnetwork.conf
, see Section 3.3.1, "Network Configuration Elements (rwnetworkconf.dtd)".
Valid Values A valid custom network configuration file in ORACLE_HOME
\reports\conf
Default rwnetwork.conf
Description This environment variable provides an override option to enable you to define the character set encoding used when saving a report in XML format. This is only necessary when the required character set mapping for NLS_LANG
to XML IANA-defined character sets do not produce the required results.
To enable your XML parser to understand the characters within the XML files, Oracle Reports does the following:
Adds an encoding attribute to the XML declaration based on the value in NLS_CHARACTERSET
, the character set part of the NLS_LANG
variable.
Translates the value set as the NLS_LANG
character set (for example, JA16SJIS
) to what is expected in the XML specification (for example, Shift_JIS
).
You can override this mapping by adding entries to the REPORTS_NLS_XML_CHARSET
.
Valid Values Set of mapping pairs separated by semicolons. The first value is the encoding that is being produced and the second mapped value is the value that should be used for these cases.
<old_name>=<new_name>[;<old_name>=<new_name>][;<old_name>=<new_name>]...
Default Not defined.
Example
WISO-8859-8=ISO-8859-8-1;CSEUCKR=EUC-KR;WINDOWS-949=EUC-KR;EUC-CN=GBK;WINDOWS-936=GBK
Description This environment variable, together with other printer and display environment variables and settings, specifies whether the system's surface and fonts should be used instead of the printer's.
Valid Values TRUE|not set
Default TRUE
Usage Notes
REPORTS_NO_DUMMY_PRINTER
is set by default and is required to be set at all times. If it is not set (as a result of being user-modified), and there is no valid printer, error REP-1800
error is raised. Alternatively, you could use TK_PRINT_STATUS when you have no valid printer. A valid printer response is required by Oracle Reports to generate output, even if you are generating to a file.
Beginning with Oracle Reports 10g, if the uiprint.txt
file does not contain a valid entry (that is, no valid printer is defined), but REPORTS_NO_DUMMY_PRINTER
is set, Oracle Reports uses screenprinter.ppd
specified in uiscreenprint.txt
. You should unset this environment variable only if you do not want the screenprinter.ppd
driver to be used by Oracle Reports when there is no valid printer.
See Also: Section 3.10.1, "ScreenPrinter" for more information on the PostScript printer driver,screenprinter.ppd .
|
The limitation of this approach is that these reports might lose their formatting when viewed from another system if it is not identical to the system where the report was designed. Furthermore, when this report is printed, the formatting would not be correct because the fonts and their metrics differ.
Printing on UNIX requires some setup and configuration to create the proper printing environment. For detailed information, refer to Chapter 5, "Printing on UNIX with Oracle Reports".
Description
This environment variable specifies whether spaces should not be replaced with
in HTML or HTMLCSS output.
Oracle Reports maps HTML metadata characters in the data retrieved for a field to the appropriate encoding. That is, Oracle Reports automatically maps:
<
to <
"
to "
In most cases, the browser produces the correct results and handles the spaces correctly. In some cases, the browser's handling of spaces does not produce the required output. This happens in such cases as where the user has padded the front of the data to produce indentation. Since the browser will treat multiple spaces as single space, the indentation is lost.
Valid Values YES|
not set
Default not set
Usage Notes
If the value is not set, all spaces are replaced by
. This could cause problems in your output where you want the browsers to handle line breaks on spaces. It will also increase the size of the generated HTML file.
If a field's Contains HTML Tags property is set to Yes, then no encoding will take place since Oracle Reports just passes the field's value through to the output.
Example
If REPORTS_NO_HTML_SPACE_REPLACE
is set to YES
, then the output for the sentence [Typical data output]
will be:
[ Typical data output]
and display as (ignoring preceding spaces):
[Typical data output]
Not setting the environment variable will cause the output to change to:
[ Typical data output]
and display as (maintaining preceding spaces):
[ Typical data output]
Note: Brackets in the preceding example are used to show preceding spaces; they are not part of the sentence. |
Description This environment variable specifies the default image format used in the report.
Valid Values GIF|JPEG|JPG|PNG|BMP
Default JPEG
Usage Notes
You must ensure the format that you specify matches the output type. For example, BMP only works for RTF and spreadsheet output. It will not work for HTML, HTMLCSS, or PDF output.
This environment variable setting is overridden by the value of the OUTPUTIMAGEFORMAT command line keyword.
Refer to Section 3.10.2, "Advanced Imaging Support" for more information.
Description This environment variable specifies the search path for files referenced by Reports Runtime. The directories specified by REPORTS_PATH
are searched first, then those specified by ORACLE_PATH
. This environment variable is used to locate reports and external objects that you use in your reports, such as PL/SQL libraries, external queries, and external boilerplate. It enables you to create reports that are easily portable across operating systems by preventing the need to hard-code directory paths.
Define REPORTS_PATH
in the same fashion you define other environment variables on your operating system, keeping in mind such platform-specific rules as path length, and so on.
In addition to directory paths, you can specify the keyword DB when you define REPORTS_PATH
. This instructs Reports Builder to search the database to which you are currently connected.
Suppose you specified the following on a UNIX platform:
setenv REPORTS_PATH /home/tkostin/pay:/home/tkostin/receive:DB
Reports Builder will first search the directory /home/tkostin/pay
. If it cannot find the file in question, it will search /home/tkostin/receive
. If it still cannot find the file, it will search the database to which you connected when you began your Reports Builder session.
Valid Values Any directory on any drive.
Default %ORACLE_HOME%\REPORT\DEMO; %ORACLE_HOME%\REPORT\DEMO\BITMAP; %ORACLE_HOME%\REPORT\DEMO\REQFILES
Usage Note
REPORTS_PATH
is limited to 256 characters.
If you specify a path for the sourceDir
attribute of the engine
element in the Reports Server configuration file (server_name
.conf
), the sourceDir
value will override the values you set here.
Example
REPORTS_PATH=C:\oracle\apps\reports;C:\myfiles
This environment variable specifies the location of the resource files required for reports. This path must include the globalization support directory extension when specifying the location of the resource files.
Valid Values Any directory on any drive.
Default %ORACLE_HOME%\reports\res\US\
Usage Note
To change locales, you must modify this environment variable, in addition to NLS_LANG.
Examples For US files:
REPORTS_RESOURCE = %ORACLE_HOME%\reports\res\US\
For Japanese files:
REPORTS_RESOURCE = %ORACLE_HOME%\reports\res\JA\
Description This environment variable specifies the default Reports Server for Web Cartridge or Web CGI requests. When this environment variable is set, you can omit the SERVER
command line keyword in report requests to process them using the default Reports Server, or you can include the SERVER
command line keyword to override the default.
This environment variable is backward compatible.
Valid Values Any Reports Server service entry name.
Usage Note
This environment variable is supported in Oracle Reports for backward compatibility for Common Gateway Interface (CGI) reports, or when Single Sign-On is not used.
Note: The functionality of Java Server Pages (JSPs) or servlets replaces support for CGI. The default Reports Server name is defined in the Reports Servlet (rwservlet ) configuration file (rwservlet.properties ), as described in Section 3.4.11, "Identifying the In-process Server".
|
Example REPORTS_SERVER=my_rep_server
Description This environment variable resolves a synchronization issue between native Motif libraries and JDK UI packages on Solaris 2.9. When REPORTS_SOLARIS_9=YES
, Reports Builder responds as expected. If you set REPORTS_SOLARIS_9=NO
in a Solaris 2.9 environment, Reports Builder may stop responding when invoking either the Report Wizard or Data Wizard.
Valid Values YES|NO
Default YES
on Solaris 2.9; NO
on other platforms.
Description This environment variable specifies whether to consider white spaces as a delimiter. Oracle Reports employs an algorithm to properly wrap a line, when a word cannot fit in the same line. By default the word wrapping algorithm considers white spaces as a delimiter.
Valid Values YES|NO
Default YES
Usage Note
Set this environment variable to NO
only for Asian languages with multibyte character sets, such as Chinese. This ensures that Oracle Reports does not consider white spaces as delimiters and will enable appropriate word wrapping functionality required by languages with multibyte character sets.
Description
This environment variable specifies whether to allow the SERVER
or USERID
keywords when running a report using the SRW.RUN_REPORT
built-in procedure.
Valid Values YES|
not set
Default not set
Usage Notes
In Oracle Reports 10g Release 2 (10.1.2), the use of keywords SERVER
and USERID
with SRW.RUN_REPORT
is deprecated. If you have reports created in prior releases that use these keywords with SRW.RUN_REPORT
, you can set REPORTS_SRWRUN_TO_SERVER=YES
to continue to run these reports with Oracle Reports 10g Release 2 (10.1.2).
You may encounter issues when attempting to run reports created in prior releases asynchronously. For this reason, it is important to migrate your reports to Oracle Reports 10g Release 2 (10.1.2) as soon as possible.
Note: For a description of theSRW built-in package, including the SRW.RUN_REPORT built-in procedure, see the Oracle Reports online Help.
|
Description This environment variable specifies the port number when using SSL.
Valid Values Any valid port number.
Default 443
Usage Note
This environment variable is supported in Oracle Reports for backward compatibility for Common Gateway Interface (CGI) reports, or when Single Sign-On is not used.
Note: The functionality of Java Server Pages (JSPs) or servlets replaces support for CGI. |
Example REPORTS_SSLPORT=442
Description This environment variable specifies the authentication template used to authenticate the username and password when users run report requests to a restricted Reports Server.
Valid Value Any HTML file that contains special authentication actions. It is recommended that you keep the default.
Default sysauth.htm
Usage Note
This environment variable is supported in Oracle Reports for backward compatibility for Common Gateway Interface (CGI) reports, or when Single Sign-On is not used.
Note: The functionality of Java Server Pages (JSPs) or servlets replaces support for CGI. |
Example REPORTS_SYS_AUTH=sysauth.htm
Description This environment variable specifies the location of the tag prefix used in the Web source of a JSP-based report. It defines the Reports URI of the tag library (TAGLIB) declarations of the .jsp file. This is typically:
<%@ taglib uri="/WEB-INF/lib/reports_tld.jar" prefix="rw" %>
When Oracle Reports finds a "uri" that matches the environment variable, it will use the corresponding "prefix" attribute to identify Oracle Reports tags within the .jsp file.
Valid Values Any "uri" that references the Oracle Reports tag library.
Default /WEB-INF/lib/reports_tld.jar
Usage Note
The default value is typically unchanged. It is the same for both reports files in both JDeveloper and Oracle Reports. The "prefix" attribute can be changed to avoid naming conflicts independent of the "uri" attribute.
Description This environment variable specifies the directory in which you wish to store Reports Builder temporary files. Reports Builder will use only one directory for this purpose; do not define more than one.
Define REPORTS_TMP
in the same fashion you define other environment variables on your base operating system, keeping in mind such platform-specific rules as path length, and so on. If you don't define REPORTS_TMP
, it will default to the current working directory.
Valid Values Any directory on any drive.
Default Not defined.
Example REPORTS_TMP=C:\tmp
Description This environment variable specifies the libraries for use by Oracle Reports. These libraries are program modules created by you to be called by Oracle Reports.
REPORTS_USEREXITS
can specify multiple libraries. On Windows, use a backslash (\) to separate directories in a path, and a semicolon (;) to separate complete paths. On UNIX, use a forward slash (/) to separate directories in a path, and a colon (:) to separate complete paths.
If this value is not explicitly set, Oracle Reports looks for rwxtb.dll
according to the path variable of the system.
Note: With Oracle Reports 10g, you can call Java methods using theORA_JAVA built-in package and the Java Importer. This reduces the need to have user exits in a report and allows for a more open and portable deployment. You may also use the ORA_FFI built-in package, which provides a foreign function interface for invoking C functions in a dynamic library. With the availability of these built-in packages, the use of user exits is deprecated in Oracle Reports, though makefiles are still be supplied to permit you to continue to work with existing user exits.
For backward compatibility, the prior name |
Valid Values Any user exit library (along with its absolute path).
Default Not defined.
Example
On Windows:
REPORTS_USEREXITS=C:\mydll.dll;d:\mynew.dll;e:\bin\speed.dll
On UNIX:
REPORTS_USEREXITS=/usr/oracle/mylib.so:/usr/oracle/myfolder/speed.so
Description This environment variable specifies whether the UTF8
character set is used instead of the NLS_LANG
character set. This environment variable is in effect only when the encoding attribute is not specified by the XML Prolog Value property (see the Oracle Reports online Help for a description of the XML Prolog Value property).
Valid Values
YES
Assigns the UTF8
character set (when the XML Prolog Value property is not set).
NO
Assigns the NLS_LANG
(or IANA-defined) character set (when the XML Prolog Value property is not set).
Default YES
This environment variable specifies the reports-specific directory within the ORACLE_HOME
.
Valid Values A valid directory name.
Default
%ORACLE_HOME%\reports (
Windows)
$ORACLE_HOME/reports (
UNIX)
Description (UNIX only) This environment variable specifies the print command to be executed on UNIX for Oracle Reports 6i. In later releases of Oracle Reports, TK_PRINT
is obsolete; you can achieve the same results by using the printing script file: ORACLE_HOME
/bin/rwlpr.sh
. This script supports lp
and lpr
commands by default. If you use some other printing command for your machine, this file needs to be modified accordingly.
Valid Values The PRINT command and all necessary keywords for your flavor of UNIX, including the following elements:
%n
is the printer name string.
%c
is the number of copies.
This string is much like a printf()
format. If this environment variable is not set, Oracle Reports 6i uses the standard default value for the platform. Examples of default values on various platforms are as follows:
System V:
lp -s -d'%n' -n%c
Solaris:
lpr -P'%n' -#%c -s
Default Not defined.
Usage Notes
In most cases, the default print commands will meet your needs. We recommend that you only set this environment variable when you have a specific need to alter the default value. For example, if you want duplexed output, you need to set TK_PRINT
.
Printing on UNIX requires some setup and configuration to create the proper printing environment. For detailed information, refer to Chapter 5, "Printing on UNIX with Oracle Reports".
Description (UNIX only) This environment variable specifies the command executed to validate the printer. To ensure that the printer is valid, this command is executed and its output is searched for the strings unknown, non-existent, or invalid. If one of these strings appears in the output, the printer is considered invalid and cannot be selected. Otherwise, the printer is accepted by Oracle Reports.
Valid Values Should include %n
for the printer name (see also TK_PRINT).
If this environment variable is not set, Oracle Reports uses the built-in default values:
System V: /usr/bin/lpstat -p'%n' 2>&1
Other: /usr/etc/lpc status '%n' 2>&1
Default Not defined.
Usage Notes
You should only use this environment variable in cases where the printer status command on your platform differs from the default values, or when you have no valid printer. If you have no valid printer, you can set TK_PRINT_STATUS=echo
and specify a dummy entry in the uiprint.txt
file. This workaround ensures that Oracle Reports gets a valid response when checking for a printer.
If REPORTS_NO_DUMMY_PRINTER is set, but the uiprint.txt
file does not contain a valid entry, then screenprinter.ppd
specified in uiscreenprint.txt
is used.
Note: REPORTS_NO_DUMMY_PRINTER is set by default and is required to be set at all times. If it is not set (as a result of being user-modified), error REP-1800 error is raised.
|
See Also: Section 3.10.1, "ScreenPrinter" for more information on the PostScript printer driver,screenprinter.ppd .
|
Printing on UNIX requires some setup and configuration to create the proper printing environment. For detailed information, refer to Chapter 5, "Printing on UNIX with Oracle Reports".
Description (UNIX only) This environment variable specifies the default printer's name.
Valid Values Name of default printer.
Default Not defined.
Usage Notes
TK_PRINTER
takes precedence over PRINTER; that is, if both variables are set, TK_PRINTER
is considered first and PRINTER
is considered only if TK_PRINTER
does not specify a valid printer. If neither TK_PRINTER
nor PRINTER
is set to a valid printer, Oracle Reports uses the first entry in your uiprint.txt
file. If REPORTS_NO_DUMMY_PRINTER
is set, but the uiprint.txt
file does not contain a valid entry, then screenprinter.ppd
specified in uiscreenprint.txt
is used.
Note: REPORTS_NO_DUMMY_PRINTER is set by default and is required to be set at all times. If it is not set (as a result of being user-modified), error REP-1800 error is raised.
|
See Also: Section 3.10.1, "ScreenPrinter" for more information on the PostScript printer driver, screenprinter.ppd .
|
Printing on UNIX requires some setup and configuration to create the proper printing environment. For detailed information, refer to Chapter 5, "Printing on UNIX with Oracle Reports".
Description This environment variable specifies the location of AFM files. TK_AFM
is considered first, then ORACLE_AFM
.
Valid Values Any directory on any drive.
Default Not defined.
Usage Notes
If you do not specify values for either of these variables, Oracle Reports looks for AFM files in:
ORACLE_HOME/guicommon/tk/admin/AFM
Printing on UNIX requires some setup and configuration to create the proper printing environment. For detailed information, refer to Chapter 5, "Printing on UNIX with Oracle Reports".
Description This environment variable specifies the location of HPD files. TK_HPD
is considered first, then ORACLE_HPD
.
Valid Values Any directory on any drive.
Default Not defined.
Usage Notes
If you do not specify values for either these variables, Oracle Reports looks for HPD files in:
ORACLE_HOME/guicommon/tk/admin/HPD
Printing on UNIX requires some setup and configuration to create the proper printing environment. For detailed information, refer to Chapter 5, "Printing on UNIX with Oracle Reports".
Description This environment variable specifies the location of PPD files. TK_PPD
is considered first, then ORACLE_PPD
.
Valid Values Any directory on any drive.
Default Not defined.
Usage notes
If you do not specify values for either of these variables, Oracle Reports looks for PPD files in:
ORACLE_HOME/guicommon/tk/admin/PPD
Printing on UNIX requires some setup and configuration to create the proper printing environment. For detailed information, refer to Chapter 5, "Printing on UNIX with Oracle Reports".
Description This environment variable specifies the location of TFM files. TK_TFM
is considered first, then ORACLE_TFM
.
Valid Values Any directory on any drive.
Default Not defined.
Usage notes
If you do not specify values for either of these variables, Oracle Reports looks for TFM files in
ORACLE_HOME/guicommon/tk/admin/TFM
Printing on UNIX requires some setup and configuration to create the proper printing environment. For information about printing on UNIX with Oracle Reports, refer to Chapter 5, "Printing on UNIX with Oracle Reports".
Description This environment variable specifies the default logon account. See your database documentation for more information on setting USERNAME
.
Valid Values Any valid Oracle username (without the OPS$
prefix).
Default Not defined.
Example USERNAME=dsanvita
Description This environment variable specifies the language for the Oracle Reports Runtime component. Chapter 18, "Implementing Globalization and Bidirectional Support" contains additional detailed information about this environment variable, including a table of valid values.