 | Chapter 7 Backups |  |
| Chapter 7 Backups | |
There are a number of software packages that allow you to perform backups. Some are vendor specific, and others are quite commonly available. Each may have particular benefits in a particular environment. We'll outline a few of the more common ones here, including a few that you might not otherwise consider. You should consult your local documentation to see if there are special programs available with your system.
The simplest form of backup is to make simple copies of your files and directories. You might make those copies to local disk, to removable disk, to tape, or to some other media. Some file copy programs will properly duplicate modification and access times, and copy owner and protection information, if you are super-user or the files belong to you. They seldom recreate links, however. Examples include:
The standard command for copying individual files. Some versions support a -r option to copy an entire directory tree.
This command can be used to copy a whole disk partition at one time by specifying the names of partition device files as arguments. This process should be done with great care if the source partition is mounted: in such a case, the device should be for the block version of the disk rather than the character version. Never copy onto a mounted partition - unless you want to destroy the partition and cause an abrupt system halt!
There are several programs that are available to make simple archives packed into disk files or onto tape. These are usually capable of storing all directory information about a file, and restoring much of it if the correct options are used. Running these programs may result in a change of either (or both) the atime and the ctime of items archived, however.[8]
[8] See Chapter 5, The UNIX Filesystem, for information about these file characteristics.
Simple file archiver. Largely obsolete for backups (although still used for creating UNIX libraries).
Simple tape archiver. Can create archives to files, tapes, or elsewhere. This choice seems to be the most widely used simple archive program.
Another simple archive program. This program can create portable archives in plain ASCII of even binary files, if invoked with the correct options. (cpio does record empty directories.)
The portable archiver/exchange tool, which is defined in the POSIX standard. This program combines tar and cpio functionality. This program uses tar as its default file format.
There are several dedicated backup programs.
This program is the "classic" one for archiving a whole partition at once, and for the associated file restorations. Many versions of this program exist, but all back up from the raw disk device, thus bypassing calls that would change any of the times present in inodes for files and directories. This program can also make the backups quite fast.
Some SVR4 systems have a suite of programs named, collectively, backup. These are also designed specifically to do backups of files and whole filesystems.
You can improvise your own backup encryption if you have an encryption program that can be used as a filter and you use a backup program that can write to a file, such as the dump, cpio, or tar commands. For example, to make an encrypted tape archive using the tar command and the des encryption program, you might use the following command:
# tar cf - dirs and files | des -ef | dd bs=10240 of=/dev/rm8
Although software encryption has potential drawbacks (for example, the software encryption program can be compromised so it records all passwords), this method is certainly preferable to storing sensitive information on unencrypted backup.
Here is an example: suppose you have a des encryption program called des which prompts the user for a key and then encrypts its standard input to standard output.[9] You could use this program with the dump (called ufsdump under Solaris) program to back up the file system /u to the device /dev/rmt8 with the command:
[9] Some versions of the des command require that you specify the "-f -" option to make the program run as a filter.
# dump f - /u | des -e | dd bs=10240 of=/dev/rmt8 Enter key:
If you wanted to back up the filesystem with tar, you would instead use the command:
# tar cf - /u | des -e | dd bs=10240 of=/dev/rmt8 Enter key:
To read these files back, you would use the following command sequences:
# dd bs=10240 if=/dev/rmt8 | des -d | restore fi - Enter key:
and:
# dd bs=10240 if=/dev/rmt8 | des -d | tar xpBfv - Enter key:
In both of these examples, the backup programs are instructed to send the backup of file systems to standard output. The output is then encrypted and written to the tape drive.
NOTE: If you encrypt the backup of a filesystem and you forget the encryption key, the information stored on the backup will be unusable.
A few programs can be used to do backups across a network link. Thus, you can do backups on one machine, and write the results to another. An obvious example would be using a program that can write to stdout, and then piping the output to a remote shell. Some programs are better integrated with networks, however.
This is a network version of the dump and restore commands. It uses a dedicated process on a machine that has a tape drive, and sends the data to that process. Thus, it allows a tape drive to be shared by a whole network of machines.
This command enables you to copy a file or a whole directory tree to a remote machine.
Although the venerable ftp command can be used to copy files, it is slow and cumbersome to use for many files, and it does not work well with directories. In addition, the standard ftp does not understand UNIX device files, sockets,[10] symbolic links, or other items that one might wish to backup.
[10] Why back up sockets? Because some programs depend upon them.
This program is often used to keep multiple machines in synchronization by copying files from a master machine to a set of slaves. However, the program primarily works by copying only files that have changed from a master set, and can therefore update a backup set of files from a working version. Thus, instead of distributing new files, the program archives them. rdist can also be run in a mode to simply print the names of files that differ between an old set and a destination machine.
There are several commercial backup and restore utilities. Several of them feature special options that make indexing files or staging little-used files to slower storage (such as write-once optical media) easier. Unfortunately, lack of portability across multiple platforms, and compatibility with sites that may not have the software installed, might be drawbacks for many users. Be sure to fully evaluate the conditions under which you'll need to use the program and decide on a backup strategy before purchasing the software.
Most backup programs check the access and modification times on files and directories to determine which entries need to be stored to the archive. Thus, you can force an entry to be included (or not included) by altering these times. The touch command enables you to do so quickly and efficiently.
However, many programs that do backups will cause the access time on files and directories to be updated when they are read for the backup. As this behavior might break other software that depends on the access times, these programs sometimes use the utime system call to reset the access time back to the value it had prior to the backup.
Unfortunately, using the ctime () system call will cause the inode change time, the ctime, to be altered. There is no filesystem call to set the ctime back to what it was, so the ctime remains altered. This is a bane to system security investigations, because it wipes out an important piece of information about files that may have been altered by an intruder.
For this reason, we suggest that you determine the behavior in this regard by any candidate backup program and choose one that does not alter file times. When considering a commercial backup system (or when designing your own), it is wise to avoid a system that changes the ctime or atime stored in the inode.
If you cannot use a backup system that directly accesses the raw disk partitions, you have two other choices:
You can unmount your disks and remount them read-only before backing them up. This procedure will allow you to use programs such as cpio or tar without changing the atime.
If your system supports NFS loopback mounts (such as Solaris or SunOS), you can create a read-only NFS loopback mount for each disk. Then you can back up the NFS-mounted disk, rather than the real device.
|  | |
| 7.3 Backing Up System Files |  | 8. Defending Your Accounts |