07December2019

TürkçeEnglish

You are here: Homepage Industrial Services

Notes

  • Job Request Form must be filled out completely and submitted with the samples to make analysis with respect to the scope of the circulating capital.
  • Taxes are not included in the listed prices.
  • Discretion for the tests that are not included in the price list belongs to the head of department .
  • Head of the department may apply lower prices than current prices hold above price list for a large number of serial samples.
  • The lowest price for a report is 80 TL. English report fee is 100 TL.
  • A discount of 50% is applied to universities.

Circulating capital account info:

T.C.Vakıflar Bankası Balçova Şubesi
Müh.Fak.Döner Sermaye Birimi adına
TR 740001500158007299649608

Analyses and Price List

ELECTRONIC MATERIALS LABORATORY    
Test Price Analysis Request Form
FTIR analysis 90 TL/pcs  

 

ELECTRON MICROSCOPE LABORATORY*    
Test Price Analysis Request Form
Sample Preparation (Gold / Carbon Coating) SEM 80  TL/ pcs  
Review and Rating, SEM 220  TL/ hour  
SEM-EDS Semi-Quantitative Analysis 100  TL/ pcs  
SEM-EDS Mapping (Analytical Haritalama) 120 TL/pcs  
Electronical Photo Print 20  TL/ pcs  

* First 5 EDS are covered within SEM analysis and the rest is 50% discount for academic person. Review and Rating is not considered in discount.

X-RAY DIFFRACTION LABORATORY    
Test Price Analysis Request Form
Taking X-ray diffraction pattern (Bulk and powder samples) 60 TL/ pcs  
Taking X-ray diffraction pattern (thin film samples)  150 TL/ pcs  
Phase analysis 160  TL/ pcs  
Residual Stress Analysis 800 TL/pcs  

 

METALLOGRAPHY LABORATORY    
Test Price Analysis Request Form
Ultra Micro Hardness (Dynamic) 280 TL/pcs MS WORD
Micro Hardness (Average of five measurement) 120 TL/pcs MS WORD
Micro Hardness Distribution 30 TL/indent
Optical Microscopy Studies    
Sample Preparation (Normal Methods) Abrasive Cutting Processes Part description and determined depending on their thickness. 120 TL/pcs MS WORD
Surface analysis (hardened, coated, treated, damaged surface) 300 TL/pcs
Particle Size Determination 300 TL/pcs
Graphite structure in cast iron, Distribution and Determination of dimensions 350 TL/pcs
Determination of the Amount of non-metallic Residuals in steels according to their types 350 TL/pcs
Microstructure Photography (Digital Camera and Electronic Media) 30 TL/pcs
Microstructural Investigation and Evaluation 250 TL/pcs
Failure Analysis (corrosion, fatigue, etc.) Depends on conditions
 Macroscopic Reviews    
Sample Preparation (Normal Methods) 120 TL/pcs MS WORD
Macro Preparation for weld Structures (Sample Preparation + Etching + Photo Shooting) 250 TL/pcs

 

MECHANICS LABORATORY    
Test Price Analysis Request Form
**Tensile Test (according to the standard) 400 TL/pcs MS WORD
**Tensile Test (Single Acting) 100 TL/pcs
**High Temperature Tensile Test (up to 600 º C) 250 TL/pcs
Compression Test 100 TL/pcs
Three-point bending test 120 TL/pcs
Hardness Measurements    
Sample Preparation 120 TL/pcs MS WORD
Determination of hardness (Average of five measurements) 120 TL/pcs
Hardness Distribution Test 30 TL/indent
Shore A and Shore D (Average of five measurements) 80 TL/pcs
Impact Tests    
Sample Preparation 120 TL/pcs MS WORD
Impact Test (room temperature, average of three tests) 80 TL
Impact Test (different temperatures, average of three tests)  200 TL

**Tensile test sample sizes can be seen here.

CHEMISTRY LABORATORY    
Test Price Analysis Request Form
Solution purification (evaporator) 70 TL/hour  
pH (average of three measurements) 70 TL/pcs  
Density (pycnometer) 130 TL/pcs  
Nondestructive Thickness Measurement (Dualscope Device) 70 TL/pcs  

 

CORROSION LABORATORY    
Test Price Analysis Request Form
Dezincification test 2200 TL/pcs  
Potentiodynamic Polarisation Test (average of 3 samples)  1100 TL  
Potentiostatic Polarisation Test (average of 3 samples) 1100 TL  
TAFEL Extrapolation Test(average of 3 samples) 1100 TL  
Electrochemical Accelerated Corrosion 900 TL/pcs  
ZRA (Zero Resistance Ammetry)  1300 TL/pcs  

 

CERAMIC LABORATORY    
Test Price Analysis Request Form
Moisture Determination in Kaolin, bentonite and Klinoptilolitte 120 TL/pcs  
Loss on Ignition and ash determination 120 TL/pcs  
Viscosity Measurement with Brookfield viscometer 140 TL/pcs  
DTA-TG analysis and evaluation    
(Analysis time: 0 – 1 hour) 150 TL /sample  
(Analysis time: 1 – 3 hour) 170 TL /sample  
(Analysis time: 3 – 7 hour) 200 TL /sample  
(Analysis time: 7 – 15 hour) 210 TL /sample  
Determination of resistance to thermal shock (water-freezing method)  250 TL/pcs  
Use Rheometer 140 TL/hour  
Hydrolic Press 150 TL/pcs  

***Analysis; For the analyses in excess of 8 hours an additional fee of 10 TL will be charged for each hour in excess of the unit price. In case of changes of pre-treatment (degassed, etc.) conditions for specific examples. The additional charge for the analyses will be evaluated by Department Chair.

HEAT TREATMENT LABORATORY    
Test Price Analysis Request Form
Using the oven    
up to 1200 ºC **** 330 TL/8 hours  
up to 1400 ºC **** 350 TL/8 hours  
up to 1600 ºC **** 400 TL/8 hours  
up to 1800 ºC (Maintenance) **** 440 TL/8 hours  

****Analysis; For the analyses in excess of 8 hours an additional fee of 20 TL will be charged for each hour in excess of the unit price. For the operations which will continue overnights, a research assistant will be on duty at least once for necessary controls, thus the cost of way expenses has to be charged.

CASTING LABORATORY    
Test Price Analysis Request Form
Melting and Casting at open atmosphere (up to 1100 ºC)    300 TL/pcs   
At Gas atmosphere (up to 1200 °C in a tube furnace)                 400 TL/pcs  MS WORD
Thermal fatigue 250 TL/day  
Sieve analysis 150 TL/pcs  
Determination of moisture 100 TL/pcs  
Determination of dead clay 120 TL/pcs  
Determination of activated clay (Methylene Blue Test) 120 TL/pcs  
Loss on Ignition 100 TL/pcs  

 

PLASTIC FORMING LABORATORY    
Test Price Analysis Request Form
Wire Erosion 120 TL/hour  
Hydraulic Press 220 TL/pcs  
Bending and Folding Experiment 120 TL/pcs  
Sample preparation by machining 170 TL/pcs  

 

TRIBOLOGY LABORATORY    
Test Price Analysis Request Form
Determination of Surface Roughness (average of three measurement) 80 TL/pcs  
Tribology Test (Pin-On-Disc / Pin on Plate) 220 TL/pcs MS WORD
2D and / or 3D surface profiling 110 TL/pcs  

Responsible for Industrial Service Department

Metallurgical Eng. Haluk GÜRSES
Tel: +90 (232) 301 7467
E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.