INSTALLATION FOR 110 ETEAM PW COCKPIT V1


NOTE:  THIS COCKPIT VERSION IS INTENDED FOR THE 110 ERAZOR EXE.

- Please Follow These Instructions Very Carefully.  There are two ways to install this cockpit.  Please find the option that best matches your current F4 configuration:

110 EFalcon exe must be installed.






1. Through 110 eFalcon installation + F4Patch4.1

Installation:
-Simply extract the contents of this zip file in your F4Patch directory.
Be sure to have the "use folder names" option checked.

Warning
Use Winzip, the Win ME build-in unzipper does not support the "use folder name" option.


- Launch F4Patch, deinstall the cockpit you use and apply the "(eF) F-16 (PW) Wide Angle Cockpit for 110+" from the "\2D cockpits\(ef) auto cockpit switcher\(ef) f16 cockpits" folder

- This installation process also adds a realistic hud tint. To activate it, check the Hud Tint for PW_110 from the Realistic Hud tint folder of F4Patch.

NOTE:  
THIS INSTALLATION OPTION ASSUMES THAT YOU HAVE USED THE EXPAND PACKAGE OPTION IN F4PATCH.  IF YOU DO NOT THEN YOU WILL NOT HAVE AN F4PATCH DIRECTORY!






2.  Without F4Patch -  110Erazor exe must be installed.

- This installation assumes you do not have F4Patch expanded or installed on your computer:


For those of you not using F4patch, simply extract all files  into a temporary directory. Be sure to have the "use folder names" checked.

Warning
Use Winzip, the Win ME build-in unzipper does not support the "use folder name" option.

Now, copy manually all files (except readme.txt; readmefirst.txt; Balkan_info.zip; Korea_info.zip; ef110_Check.zip) from your TEMP\cockpits\f16\f16pw_110 to your falcon4\art\ckptart directory. (where temp is the temporary directory you just created)






ADDITIONAL INFORMATION REQUIRED FOR SETUP!!!!

The TAC REF is not accessible from the cockpit down view. There is now a specific keypress to access all TAC REF data. Here is how to do it:

1. Be sure the cockpit is correctly installed
2. Go into the game and into setup.
3. Go to the controllers keymapping section and find the entry labelled VIEW-COCKPIT 9:00 (it is located near the bottom).  Assign a convenient key to this or simply notice the key assigned to it.
4.  Find the VIEW-COCKPIT 12:00 and assign a key to this or simply notice the key assigned to it.

Inside the program you can now switch to the tac ref by hitting the key you assigned to the 9:00 view.  You can exit the tac ref by following the EXIT arrows in the tac ref or by hitting the key you assigned to the 12:00 view.



CHECKLISTS INFORMATION.
The tac ref has been updated for this release. You can also find 3 pdf files with the 110 updated checklists in the f4patch\cockpits\f16\f16pw_110 folder.
Balkan_info is the Balkan theater booklet
Korea_info is the Korean theater booklet
eF110_Check is the main 110+RP5 Checklists.
All files are US Letter, pdf format.



NOTE:
The idle detente can be found on the throttle base in the down-left-left view.  You will find a simple graphic of a square with the words "ID".  I cannot add a switch since the idle detente is normally located on the throttle and I currently do not have a graphic of a throttle in my cockpit.

There is no SA Bar variation in this version of the pit due to panel limitation of numbuttonviews.



TROUBLESHOOTING:
For the first installation option (Through F4Patch)
If the cockpit does not appear in the program please verify the following:
1. Do you really have F4Patch installed on your computer?
2. Have you expanded F4Patch so that you have an F4Patch directory?
3. When extracting did you aim the extract at your falcon4/f4patch directory?
4. Did you remember to have "use folder names" enabled?
5. Do you have 1024X768 set in graphic options in the program?

For the second installation option Without F4Patch 
If the cockpit does not appear in the program please verify the following:
1. Please verify that you do not have F4Patch installed.
2. Did you extract the zip files into a temp directory and then move the contents of the F16pw_110 directory to your falcon4\art\ckptart directory?
3. Did you remember to have "use folder names" enabled when extracting to a temp directory?
4. Do you have 1024X768 set in graphic options in the program?
5. If you still have problems please look at the contents of your ckptart directory to verify that the cockpit files are actually there.





