/* vim: set sw=8 ts=8 si : */
/****************************************************************************
* Title   :   HD44780U LCD library
* Authors:   
* Based on Volker Oth's lcd library (http://members.xoom.com/volkeroth)
* modified by Peter Fleury's (http://jump.to/fleury). Flexible pin
* configuration by Markus Ermert. Adapted for the linuxfocus LCD display
* by Guido Socher.
*
* Software:  AVR-GCC with AVR-AS
* Target:    any AVR device
* Copyright: GPL
*
*        
*****************************************************************************/
#ifndef LCD_H
#define LCD_H
#include 


/* you shouldn't need to change anything below this line */

typedef unsigned char  u08;
typedef unsigned short u16;


/* instruction register bit positions */
#define LCD_CLR             0      /* DB0: clear display */
#define LCD_HOME            1      /* DB1: return to home position */
#define LCD_ENTRY_MODE      2      /* DB2: set entry mode */
#define LCD_ENTRY_INC       1      /*   DB1: 1=increment, 0=decrement  */
#define LCD_ENTRY_SHIFT     0      /*   DB2: 1=display shift on        */
#define LCD_ON              3      /* DB3: turn lcd/cursor on */
#define LCD_ON_DISPLAY      2      /*   DB2: turn display on */
#define LCD_ON_CURSOR       1      /*   DB1: turn cursor on */
#define LCD_ON_BLINK        0      /*     DB0: blinking cursor ? */
#define LCD_MOVE            4      /* DB4: move cursor/display */
#define LCD_MOVE_DISP       3      /*   DB3: move display (0-> cursor) ? */
#define LCD_MOVE_RIGHT      2      /*   DB2: move right (0-> left) ? */
#define LCD_FUNCTION        5      /* DB5: function set */
#define LCD_FUNCTION_8BIT   4      /*   DB4: set 8BIT mode (0->4BIT mode) */
#define LCD_FUNCTION_2LINES 3      /*   DB3: two lines (0->one line) */
#define LCD_FUNCTION_10DOTS 2      /*   DB2: 5x10 font (0->5x7 font) */
#define LCD_CGRAM           6      /* DB6: set CG RAM address */
#define LCD_DDRAM           7      /* DB7: set DD RAM address */
#define LCD_BUSY            7      /* DB7: LCD is busy */

/* set entry mode: display shift on/off, dec/inc cursor move direction */
#define LCD_ENTRY_DEC            0x04   /* display shift off, dec cursor move dir */
#define LCD_ENTRY_DEC_SHIFT      0x05   /* display shift on,  dec cursor move dir */
#define LCD_ENTRY_INC_           0x06   /* display shift off, inc cursor move dir */
#define LCD_ENTRY_INC_SHIFT      0x07   /* display shift on,  inc cursor move dir */

/* display on/off, cursor on/off, blinking char at cursor position */
#define LCD_DISP_OFF             0x08   /* display off                            */
#define LCD_DISP_ON              0x0C   /* display on, cursor off                 */
#define LCD_DISP_ON_BLINK        0x0D   /* display on, cursor off, blink char     */
#define LCD_DISP_ON_CURSOR       0x0E   /* display on, cursor on                  */
#define LCD_DISP_ON_CURSOR_BLINK 0x0F   /* display on, cursor on, blink char      */

/* move cursor/shift display */
#define LCD_MOVE_CURSOR_LEFT     0x10   /* move cursor left  (decrement)          */
#define LCD_MOVE_CURSOR_RIGHT    0x14   /* move cursor right (increment)          */
#define LCD_MOVE_DISP_LEFT       0x18   /* shift display left                     */
#define LCD_MOVE_DISP_RIGHT      0x1C   /* shift display right                    */

/* function set: set interface data length and number of display lines */
#define LCD_FUNCTION_4BIT_1LINE  0x20   /* 4-bit interface, single line, 5x7 dots */
#define LCD_FUNCTION_4BIT_2LINES 0x28   /* 4-bit interface, dual line,   5x7 dots */
#define LCD_FUNCTION_8BIT_1LINE  0x30   /* 8-bit interface, single line, 5x7 dots */
#define LCD_FUNCTION_8BIT_2LINES 0x38   /* 8-bit interface, dual line,   5x7 dots */


#define LCD_MODE_DEFAULT     ((1<