Skip Headers
Oracle® Application Server Installation Guide
10g Release 2 (10.1.2) for Linux x86
B19310-03
  Go To Documentation Library
Home
Go To Table Of Contents
Contents
Go To Index
Index

Previous
Previous
Next
Next
 

16 Post-Installation Tasks

Contents:

16.1 State of Oracle Application Server Instances After Installation

After installation, the components that you have configured are started up (unless you have configured them to use ports lower than 1024, in which case you have to start them up manually).

You can view the Welcome page and the Application Server Control page in a browser. The URLs for these pages are shown in the last screen of the installer. You can view the contents of the last screen in the file ORACLE_HOME/install/setupinfo.txt.

You can use scripts or you can use the Oracle Enterprise Manager 10g Application Server Control to start and stop Oracle Application Server instances. Refer to Oracle Application Server Administrator's Guide for details.

16.2 Passwords for Oracle Application Server Components

By default, all passwords for Oracle Application Server components, with the exception of the OracleAS Metadata Repository schema passwords, are set to be the same as the Oracle Application Server instance password. For security reasons, you should change the passwords of the various components to have different values.

Refer to Oracle Application Server Administrator's Guide and the component guides in the Oracle Application Server Documentation Library for details on how to alter the passwords for the components you have installed.

16.3 NFS Installations

If you installed Oracle Application Server on an NFS disk, you need to edit the LockFile directive in the ORACLE_HOME/Apache/Apache/conf/httpd.conf file so that it points to a local disk. This file is used by the Oracle HTTP Server component.

Refer to Oracle HTTP Server Administrator's Guide for details.

16.4 OracleAS File-Based Clustering

If you want to set up OracleAS Clusters managed using a file-based repository, you need to perform the steps listed in the Oracle Application Server High Availability Guide.

Note that when you run the "dcmctl joinFarm" command, it invokes "opmnctl stopall", which stops all components. After the "dcmctl joinFarm" command completes, you have to run "opmnctl startall" to restart the components.

16.5 Backup and Recovery

After installation would be a good time to start backing up the files, and to set up your backup and recovery strategy. Refer to Oracle Application Server Administrator's Guide for details.

16.6 SSL

By default, most components are not configured for SSL. To enable SSL, refer to the SSL section in Oracle Application Server Administrator's Guide.

16.7 Operating System Locale and NLS_LANG Environment Variable

If you installed Oracle Application Server in a non-English language environment, check your settings as described in these sections:

16.7.1 Check the Operating System Locale

To make sure the default locale is set properly, verify that the LC_ALL or LANG environment variables are set with the appropriate values. To check the current setting, run the locale command:

prompt> locale

16.7.2 Check the NLS_LANG Setting

To check the NLS_LANG setting:

  1. Make sure the value of the NLS_LANG environment variable is compatible with the default locale setting of the operating system. Refer to Oracle Application Server Globalization Guide for details, including a list of files that set this variable. You might need to edit the value of the NLS_LANG variable in these files.

  2. Check that the NLS_LANG setting in the ORACLE_HOME/opmn/conf/opmn.xml file is identical to the NLS_LANG environment variable.

    Example: The NLS_LANG setting in the opmn.xml file might look something like this:

    <environment>
         <variable id="TMP" value="/tmp"/> 
         <variable id="NLS_LANG" value="JAPANESE_JAPAN.JA16SJIS"/> 
    </environment>
    
    

16.8 Component Configuration After Installation

If you did not configure a component during installation (that is, you did not select the component in the Select Configuration Options screen), you can configure some components after installation. Some components have dependencies that you have to complete before you can configure the component. Section 16.8.1, "Configuring mod_osso (Required for Oracle Delegated Administration Services)" describes how to configure mod_osso, which has to be configured before you can configure Oracle Delegated Administration Services.

16.8.1 Configuring mod_osso (Required for Oracle Delegated Administration Services)

If you did not configure Oracle Delegated Administration Services during installation, you can do it after installation using Oracle Enterprise Manager 10g Application Server Control.

Oracle Delegated Administration Services requires OracleAS Single Sign-On and mod_osso. mod_osso is an Oracle HTTP Server module that communicates with the Single Sign-On server. If mod_osso is not configured, you have to configure it before you can configure Oracle Delegated Administration Services. Here are the steps:

  1. Ensure that OracleAS Single Sign-On is configured against Oracle Internet Directory. This is done for you if you have installed and configured these two components from the installer.

  2. Check if mod_osso is configured in the ORACLE_HOME where you want to configure Oracle Delegated Administration Services.

    Examine the following line in the ORACLE_HOME/Apache/Apache/conf/httpd.conf file. ORACLE_HOME refers to the directory where you want to configure Oracle Delegated Administration Services.

    include "ORACLE_HOME/Apache/Apache/conf/mod_osso.conf"
    
    

    If the line starts with #, then it is commented out and mod_osso is not configured in this installation. Perform step 3 to configure mod_osso.

    If the line is not commented out, mod_osso is already configured. You can go ahead and configure Oracle Delegated Administration Services using Application Server Control. Go to step 5.

  3. To configure mod_osso manually, perform these steps:

    1. Set the ORACLE_HOME environment variable to the full path of the directory where you want to configure Oracle Delegated Administration Services.

    2. Set the LD_LIBRARY_PATH environment variable to contain $ORACLE_HOME/lib32 and $ORACLE_HOME/network/lib.

    3. Set the LD_LIBRARY_PATH_64 environment variable to contain $ORACLE_HOME/lib.

    4. Run the following command (all on one line). Note: for the -classpath parameter, do not type any space characters after the colon (:) characters, as indicated by <no spaces>:

      prompt> $ORACLE_HOME/jdk/bin/java
       -classpath .:$ORACLE_HOME/sso/lib/ossoreg.jar:<no spaces>
       $ORACLE_HOME/jlib/ojmisc.jar:<no spaces>
       $ORACLE_HOME/jlib/repository.jar:<no spaces>
       $ORACLE_HOME/j2ee/home/jazn.jar:$ORACLE_HOME/jdk/lib/dt.jar:<no spaces>
       $ORACLE_HOME/jdk/lib/tools.jar:$ORACLE_HOME/jlib/infratool.jar
       oracle.ias.configtool.UseInfrastructure i
       -f $ORACLE_HOME/config/infratool_mod_osso.properties
       -h OIDhost -p OIDport -u OIDadminName -w OIDclearTextPassword
       -o ORACLE_HOME -m ASinstanceName
       -infra infraGlobalDBName -mh host -sso true
       -sslp sslPort -sslf false
      
      

      Table 16-1 describes the parameters where you have to supply values:

      Table 16-1 Parameters for Configuring mod_osso

      Parameter Description

      -h OIDhost

      Specifies the name of the computer where Oracle Internet Directory is running. You can determine this value from the OIDhost parameter in the ORACLE_HOME/config/ias.properties file.

      -p OIDport

      Specifies the port number on which Oracle Internet Directory is listening. You can determine this value from the OIDport parameter in the ORACLE_HOME/config/ias.properties file.

      -u OIDadminName

      Specifies the login name for Oracle Internet Directory. Use the superuser: cn=orcladmin.

      -w OIDclearTextPassword

      Specifies the password for the Oracle Internet Directory user.

      -o ORACLE_HOME

      Specifies the full path to the directory where you installed OracleAS Infrastructure.

      -m ASinstanceName

      Specifies the name of the OracleAS Infrastructure instance where you want to configure mod_osso. You can determine this value from the IASname parameter in the ORACLE_HOME/config/ias.properties file.

      -infra infraGlobalDBname

      Specifies the name of the OracleAS Metadata Repository database. You can determine this value from the InfrastructureDBCommonName parameter in the ORACLE_HOME/config/ias.properties file.

      -mh host

      Specifies the full hostname (including the domain name) of the computer where you want to configure Oracle Delegated Administration Services.

      -sslp sslPort

      Specifies the SSL port for Oracle Internet Directory. You can determine this value from the OIDsslport parameter in the ORACLE_HOME/config/ias.properties file.


  4. Restart OC4J and Oracle HTTP Server. You can do this using the opmnctl command.

    prompt> $ORACLE_HOME/opmn/bin/opmnctl restartproc ias-component=OC4J
    prompt> $ORACLE_HOME/opmn/bin/opmnctl restartproc ias-component=HTTP_Server
    
    
  5. Once mod_osso is configured, you can configure Oracle Delegated Administration Services using the Application Server Control. Refer to Oracle Internet Directory Administrator's Guide for details.

16.9 Components that Require Postinstallation Tasks

If you plan to use any of the components listed in Table 16-2, you need to perform some steps specific to the component after installation before you can use the component. Table 16-2 lists the component guides that describe the steps.

Table 16-2 Components Requiring Post-Installation Steps

Component Guide That Describes the Post-Installation Steps

OracleAS Portal


Oracle Application Server Portal Configuration Guide


OracleAS Wireless


Oracle Application Server Wireless Administrator's Guide


Oracle Ultra Search


Oracle Ultra Search Administrator's Guide


OracleBI Discoverer


To prepare your relational data for analysis, enable users and roles, and set up security, refer to the Oracle Discoverer Administration Guide.

Note: You can find this guide on the Oracle Business Intelligence Tools CD.

To find out about middle tier post-installation tasks, refer to the Oracle Business Intelligence Discoverer Configuration Guide.

OracleAS Reports Services


Oracle Application Server Reports Services Publishing Reports to the Web


OracleAS Personalization


Oracle Application Server Personalization Administrator's Guide


OracleAS Certificate Authority


Oracle Application Server Certificate Authority Administrator's Guide



16.10 What to Do Next?

After installing Oracle Application Server, you should read the Oracle Application Server Administrator's Guide. Specifically, you should read the "Getting Started After Installing Oracle Application Server" chapter.

You should also perform a complete Oracle Application Server environment backup after installing Oracle Application Server. This enables you to restore a working environment in case something goes wrong. For details on how to perform a complete Oracle Application Server environment backup, refer to Oracle Application Server Administrator's Guide.

You should also perform a complete Oracle Application Server environment backup after each successful patchset upgrade and after each successful configuration change.