Release 9.2.0
Part Number A96671-01
 Home |
 Book List |
 Contents |
 Index |
 Master Index |
 Feedback |
| Oracle Enterprise Manager Messages Manual Release 9.2.0 Part Number A96671-01 |
|
This chapter contains probable causes and recommended actions for messages with the following prefixes:
| Messages | See Page |
|---|---|
Cause: The administrator no longer exists or the Oracle Management Server is no longer available.
Action: Close and reopen the Management Administrators dialog. If the Oracle Management Server is down, restart it and log back into the server (or another sharing the repository).
Cause: You tried to perform a task for which you have not been granted proper privileges.
Action: To perform this task, you would need to be granted full privileges, be the owner of the operation, or be a Super Administrator.
Cause: The username is invalid or has not been entered.
Action: Enter a valid username.
Cause: The password is invalid or has not been entered.
Action: Enter a valid password.
Cause: The password in the "confirm password" field is not the same as the password.
Action: Make sure both passwords are the same.
Cause: You specified an administrator name that is already being used by another administrator.
Action: Specify a different name for the administrator.
Cause: Exceptions beyond the scope of the console occurred - for example, the Oracle Management Server going down.
Action: Contact Oracle Support Services.
Cause: You tried to remove an administrator who is still logged into the system.
Action: Make sure the administrator to be removed is logged out of the system before attempting the removal.
Cause: "Out of band" exceptions occurred while launching the event ticker.
Action: Contact Oracle Support Services.
Cause: You have changed the destination of the job or event you are creating. Changing the destination will cause you to lose all changes you have made.
Action: Click OK to start over, or click cancel to retain your previous work.
Cause: An error was encountered attempting to remove a database, listener, node, or other discovered service from the Oracle Enterprise Manager Console. A detailed error is attached to this message.
Action: Take corrective action, such as re-attempting the removal of the service.
Cause: An attempt to revoke access to the job or event subsystem failed.
Action: Examine the failure details and perform the corrective action.
Cause: A superuser has revoked access to the event subsystem for this user. The ability to register events and view them has been revoked.
Action: The administrator that revoked access or other super users can grant access again if it is deemed prudent. Contact one of these users to correct the revocation if required.
Cause: A superuser has revoked access to the job subsystem for this user. The ability to submit jobs and view them has been revoked.
Action: The administrator that revoked access or other superusers can grant access again if it is deemed prudent. Contact one of these users to correct the revocation if required.
Cause: A refresh has occurred on the pane, and the selection made earlier has been lost because of refreshed data.
Action: Select the data again.
Cause: The current selection does not correspond to the menu option selected.
Action: Re-select the item and attempt the menu selection again.
Cause: You tried to apply a command meant only for a single item.
Action: Select only one item before applying this command.
Cause: The console tried to initialize a group to display. Either the Oracle Management Server or the network is down.
Action: Retry the operation or close the group window and open it again.
Cause: You tried to delete a group object that could not be deleted.
Action: You do not have proper privileges to delete the object. Full privileges are required to perform this task. There is also the possibility that the group you are trying to remove does not exists.
Cause: The database on the node is down. Because the node contains only one database, the node cannot be expanded to display database administrative objects.
Action: Make sure the database is up before performing the operation.
Cause: While you were creating a group, the .gif file specified in the field box could not be found, or its case is incorrect. (Background image filenames are case sensitive.)
Action: Put all background images in the $ORACLE_HOME/classes/oracle/sysman/resources/images directory and make sure to specify the correct filename.
Cause: You tried to perform an operation without Full privileges, which includes the ability to delete objects.
Action: You must obtain Full privileges to perform this task.
Cause: You tried to submit an event without assigning it a name.
Action: Specify a name for the event before submitting it.
Cause: You tried to submit an event without specifying the target destination(s) against which the event will be registered.
Action: Specify one or more target destinations for the event, or save the event to the event library.
Cause: You tried to perform an operation for which you have not been granted the proper privileges.
Action: Make sure you have been granted the proper privileges for the command.
Cause: You tried to register an object that has the same name as an existing object. Oracle Enterprise Manager does not allow objects to have the same name.
Action: Give a different name to the object you are registering.
Cause: You tried to create an event with a frequency (the number of times the system tests for the event occurrence) that is less than 60 seconds.
Action: Specify a frequency for the event that is 60 seconds or more.
Cause: You tried to edit a library event of which the fixit job is invalid. The fixit job was invalidated either because it was removed (by you or by somebody else) or because the target against which the fixit job has been submitted has undergone a change.
Action: Edit the event by changing the fixit job to something else.
Cause: Either the Oracle Management Server is down, or the administrator has been deleted.
Action: Retry the operation.
Cause: Either the Oracle Management Server is down, or the administrator has been deleted.
Action: Retry the operation.
Cause: The event you are submitting does not have a specified destination or is missing required parameter specifications.
Action: Check to see that the destination and all required parameters have been specified.
Cause: You tried to submit an incomplete operation from the library
Action: Complete all the required specifications for the job or event and submit.
Cause: You tried to submit a job or event without a destination.
Action: You must discover at least one node before sending a job or event.
Cause: While editing or viewing a job or event, the console tried to reconstitute the job tasks or event tests with data that is corrupted.
Action: Check the installation.
Cause: Either the Oracle Management Server is down, or the connection failed between the Oracle Management Server and the application.
Action: Check the status of the Oracle Management Server and the network.
Cause: An invalid target type was specified for the current job/event or test/task.
Action: Because certain jobs/events or tests/tasks can only be submitted against particular target types, you must select the appropriate target type.
Cause: The submit operation you tried to perform is incomplete.
Action: Either provide full details for the submit operation, or save it to the library.
Cause: The task(s) you tried to submit is incomplete.
Action: Either provide full details for the task(s), or save it to the library.
Cause: A job caused a large output. Given the memory conditions on the console, the job output could not be loaded into the text area.
Action: None
Cause: The task descriptor is not written properly and could not be loaded by Oracle Enterprise Manager.
Action: Rewrite the task descriptor properly.
Cause: The selection of tasks/tests on the job/event parameters page has changed, but there is no current selection.
Action: Close the dialog and re-attempt the operation. If the problem persists, report the problem to Oracle Support Services.
Cause: The task could not be found possibly because it was not installed with the Oracle Enterprise Manager install, even though it may have been registered in the Enterprise Manager registry.
Action: Integrate the task with the Enterprise Manager install.
Cause: None of the notification conditions was selected, even though the email/page notify checkbox was selected.
Action: If the notify checkbox was checked, check at least one notification condition.
Cause: Another user deleted the object from the job/event history before you refreshed your history view.
Action: Refresh your history view using the Refresh History button.
Cause: The client is not able to establish a secure communication channel to the server.
Action: Retry the operation, making sure the Oracle Management Server is running. If the problem persists, contact Oracle Support Services. You may also want to submit the Oracle Enterprise Manager trace file.
Cause: You tried to run more than one instance of the Discovery/Refresh wizard.
Action: Close the first instance of the Discovery/Refresh wizard before performing another discovery/refresh operation.
Cause: The address could not be parsed correctly. The port number could not be decoded. This is condition is considered an internal error.
Action: Remove the database from the configured node, re-enter the node configuration information, and report the problem to Oracle Support Services.
Cause: The Oracle Management Server returned an error while getting the data. This should never happen and is considered an internal error.
Action: Remove the configured node, enter its information again, and report the problem to Oracle Support Services.
Cause: The node was previously discovered. This is unusual, but could happen if you skipped refresh on a node, or if a node was discovered by another user after you finished the progress page.
Action: Do not attempt to configure this node.
Cause: You did not enter any databases for this node. Newly configured nodes must have databases configured on them to be shown in the navigator.
Action: If you want this node to be in the list of manageable nodes, add at least one database configuration to it.
Cause: You did not enter any databases for the listed nodes. Newly configured nodes must have databases configured on them to be shown in the Navigator.
Action: Add at least one database configuration to each node that you want to be added to the list of manageable nodes.
Cause: Some database configurations for the node were only partially filled in.
Action: Finish the configurations or delete them.
Cause: The database configuration for some nodes were only partially filled in.
Action: Finish the configurations or delete them.
Cause: An error occurred while trying to import a file specified by the user.
Action: Check that the file exists, is readable, and is a text file.
Cause: You selected nodes to refresh that are currently manually configured.
Action: You can either refresh these files or not refresh them. See the Oracle Enterprise Manager online Help for more information.
Cause: The Oracle Management Server may be down or not responding.
Action: Disconnect from the Oracle Management Server and try again.
Cause: The error is unknown, but is most likely a logic error.
Action: Contact Oracle Support Services.
Cause: Errors were reported in the progress page.
Action: Click Next for further options, or click Cancel to exit.
Cause: You attempted to cancel the wizard while discovering a node.
Action: Click Yes to end the wizard, No to continue the wizard, or Help to get more information.
|
 Copyright © 1996, 2002 Oracle Corporation. All Rights Reserved. |
|
