Release 2 (9.2)
Part Number A96524-01
 Home |
 Book List |
 Contents |
 Index |
 Master Index |
 Feedback |
| Oracle9i Database Concepts Release 2 (9.2) Part Number A96524-01 |
|
This chapter defines a transaction and describes how you can manage your work using transactions. It includes:
A transaction is a logical unit of work that contains one or more SQL statements. A transaction is an atomic unit. The effects of all the SQL statements in a transaction can be either all committed (applied to the database) or all rolled back (undone from the database).
A transaction begins with the first executable SQL statement. A transaction ends when it is committed or rolled back, either explicitly with a COMMIT or ROLLBACK statement or implicitly when a DDL statement is issued.
To illustrate the concept of a transaction, consider a banking database. When a bank customer transfers money from a savings account to a checking account, the transaction can consist of three separate operations:
Oracle must allow for two situations. If all three SQL statements can be performed to maintain the accounts in proper balance, the effects of the transaction can be applied to the database. However, if a problem such as insufficient funds, invalid account number, or a hardware failure prevents one or two of the statements in the transaction from completing, the entire transaction must be rolled back so that the balance of all accounts is correct.
Figure 16-1 illustrates the banking transaction example.
A SQL statement that runs successfully is different from a committed transaction. Executing successfully means that a single statement was:
However, until the transaction that contains the statement is committed, the transaction can be rolled back, and all of the changes of the statement can be undone. A statement, rather than a transaction, runs successfully.
Committing means that a user has explicitly or implicitly requested that the changes in the transaction be made permanent. An explicit request means that the user issued a COMMIT statement. An implicit request can be made through normal termination of an application or in data definition language, for example. The changes made by the SQL statements of your transaction become permanent and visible to other users only after your transaction has been committed. Only other users' transactions that started after yours will see the committed changes.
You can name a transaction using the SET TRANSACTION ... NAME statement before you start the transaction. This makes it easier to monitor long-running transactions and to resolve in-doubt distributed transactions.
If at any time during execution a SQL statement causes an error, all effects of the statement are rolled back. The effect of the rollback is as if that statement had never been run. This operation is a statement-level rollback.
Errors discovered during SQL statement execution cause statement-level rollbacks. An example of such an error is attempting to insert a duplicate value in a primary key. Single SQL statements involved in a deadlock (competition for the same data) can also cause a statement-level rollback. Errors discovered during SQL statement parsing, such as a syntax error, have not yet been run, so they do not cause a statement-level rollback.
A SQL statement that fails causes the loss only of any work it would have performed itself. It does not cause the loss of any work that preceded it in the current transaction. If the statement is a DDL statement, then the implicit commit that immediately preceded it is not undone.
The user can also request a statement-level rollback by issuing a ROLLBACK statement.
Oracle provides a means for suspending, and later resuming, the execution of large database operations in the event of space allocation failures. This enables an administrator to take corrective action, instead of the Oracle database server returning an error to the user. After the error condition is corrected, the suspended operation automatically resumes. This feature is called resumable space allocation and the statements that are affected are called resumable statements.
A statement runs in a resumable mode only when the client explicitly enables resumable semantics for the session using the ALTER SESSION statement.
Resumable space allocation is suspended when one of the following conditions occur:
For nonresumable space allocation, these conditions result in errors and the statement is rolled back.
Suspending a statement automatically results in suspending the transaction. Thus all transactional resources are held through a statement suspend and resume.
When the error condition disappears (for example, as a result of user intervention or perhaps sort space released by other queries), the suspended statement automatically resumes execution.
| See Also:
Oracle9i Database Administrator's Guide for information about enabling resumable space allocation, what conditions are correctable, and what statements can be made resumable. |
A transaction in Oracle begins when the first executable SQL statement is encountered. An executable SQL statement is a SQL statement that generates calls to an instance, including DML and DDL statements.
When a transaction begins, Oracle assigns the transaction to an available undo tablespace or rollback segment to record the rollback entries for the new transaction.
A transaction ends when any of the following occurs:
COMMIT or ROLLBACK statement without a SAVEPOINT clause.CREATE, DROP, RENAME, or ALTER. If the current transaction contains any DML statements, Oracle first commits the transaction, and then runs and commits the DDL statement as a new, single statement transaction.After one transaction ends, the next executable SQL statement automatically starts the following transaction.
|
Note: Applications should always explicitly commit or roll back transactions before program termination. |
Committing a transaction means making permanent the changes performed by the SQL statements within the transaction.
Before a transaction that modifies data is committed, the following has occurred:
When a transaction is committed, the following occurs:
See Also:
|
Rolling back means undoing any changes to data that have been performed by SQL statements within an uncommitted transaction. Oracle uses undo tablespaces or rollback segments to store old values. The redo log contains a record of changes.
Oracle lets you roll back an entire uncommitted transaction. Alternatively, you can roll back the trailing portion of an uncommitted transaction to a marker called a savepoint.
All types of rollbacks use the same procedures:
In rolling back an entire transaction, without referencing any savepoints, the following occurs:
See Also:
|
You can declare intermediate markers called savepoints within the context of a transaction. Savepoints divide a long transaction into smaller parts.
Using savepoints, you can arbitrarily mark your work at any point within a long transaction. You then have the option later of rolling back work performed before the current point in the transaction but after a declared savepoint within the transaction. For example, you can use savepoints throughout a long complex series of updates, so if you make an error, you do not need to resubmit every statement.
Savepoints are similarly useful in application programs. If a procedure contains several functions, then you can create a savepoint before each function begins. Then, if a function fails, it is easy to return the data to its state before the function began and re-run the function with revised parameters or perform a recovery action.
After a rollback to a savepoint, Oracle releases the data locks obtained by rolled back statements. Other transactions that were waiting for the previously locked resources can proceed. Other transactions that want to update previously locked rows can do so.
When a transaction is rolled back to a savepoint, the following occurs:
The transaction remains active and can be continued.
You can name a transaction, using a simple and memorable text string. This name is a reminder of what the transaction is about. Transaction names replace commit comments for distributed transactions, with the following advantages:
V$TRANSACTION.Name a transaction using the SET TRANSACTION ... NAME statement before you start the transaction.
When you name a transaction, you associate the transaction's name with its ID. Transaction names do not have to be unique; different transactions can have the same transaction name at the same time by the same owner. You can use any name that enables you to distinguish the transaction.
In previous releases, you could associate a comment with a transaction by using a commit comment. However, a comment can be associated with a transaction only when a transaction is being committed.
Commit comments are still supported for backward compatibility. However, Oracle Corporation strongly recommends that you use transaction names. Commit comments are ignored in named transactions.
See Also:
|
In a distributed database, Oracle must coordinate transaction control over a network and maintain data consistency, even if a network or system failure occurs.
A distributed transaction is a transaction that includes one or more statements that update data on two or more distinct nodes of a distributed database.
A two-phase commit mechanism guarantees that all database servers participating in a distributed transaction either all commit or all roll back the statements in the transaction. A two-phase commit mechanism also protects implicit DML operations performed by integrity constraints, remote procedure calls, and triggers.
The Oracle two-phase commit mechanism is completely transparent to users who issue distributed transactions. In fact, users need not even know the transaction is distributed. A COMMIT statement denoting the end of a transaction automatically triggers the two-phase commit mechanism to commit the transaction. No coding or complex statement syntax is required to include distributed transactions within the body of a database application.
The recoverer (RECO) background process automatically resolves the outcome of in-doubt distributed transactions--distributed transactions in which the commit was interrupted by any type of system or network failure. After the failure is repaired and communication is reestablished, the RECO process of each local Oracle server automatically commits or rolls back any in-doubt distributed transactions consistently on all involved nodes.
In the event of a long-term failure, Oracle allows each local administrator to manually commit or roll back any distributed transactions that are in doubt as a result of the failure. This option enables the local database administrator to free any locked resources that are held indefinitely as a result of the long-term failure.
If a database must be recovered to a point in the past, Oracle's recovery facilities enable database administrators at other sites to return their databases to the earlier point in time also. This operation ensures that the global database remains consistent.
Application developers can improve the performance of short, nondistributed transactions by using the BEGIN_DISCRETE_TRANSACTION procedure. This procedure streamlines transaction processing so that short transactions can run more rapidly.
During a discrete transaction, all changes made to any data are deferred until the transaction commits. Of course, other concurrent transactions are unable to see the uncommitted changes of a transaction whether the transaction is discrete or not.
The following events occur during a discrete transaction:
This transaction design eliminates the need to generate undo information, because the block is not modified until the transaction is committed, and the redo information is stored in the redo log buffers.
There is no interaction between discrete transactions, which always generate redo, and the NOLOGGING mode, which applies only to direct path operations. Discrete transactions can therefore be issued against tables that have the NOLOGGING attribute set.
| See Also:
Oracle9i Supplied PL/SQL Packages and Types Reference for more information about the |
Autonomous transactions are independent transactions that can be called from within another transaction. An autonomous transaction lets you leave the context of the calling transaction, perform some SQL operations, commit or roll back those operations, and then return to the calling transaction's context and continue with that transaction.
Once invoked, an autonomous transaction is totally independent of the main transaction that called it. It does not see any of the uncommitted changes made by the main transaction and does not share any locks or resources with the main transaction. Changes made by an autonomous transaction become visible to other transactions upon commit of the autonomous transactions.
One autonomous transaction can call another. There are no limits, other than resource limits, on how many levels of autonomous transactions can be called.
Deadlocks are possible between an autonomous transaction and its calling transaction. Oracle detects such deadlocks and returns an error. The application developer is responsible for avoiding deadlock situations.
Autonomous transactions are useful for implementing actions that need to be performed independently, regardless of whether the calling transaction commits or rolls back, such as transaction logging and retry counters.
You can call autonomous transactions from within a PL/SQL block. Use the pragma AUTONOMOUS_TRANSACTION. A pragma is a compiler directive. You can declare the following kinds of PL/SQL blocks to be autonomous:
When an autonomous PL/SQL block is entered, the transaction context of the caller is suspended. This operation ensures that SQL operations performed in this block (or other blocks called from it) have no dependence or effect on the state of the caller's transaction context.
When an autonomous block invokes another autonomous block or itself, the called block does not share any transaction context with the calling block. However, when an autonomous block invokes a non-autonomous block (that is, one that is not declared to be autonomous), the called block inherits the transaction context of the calling autonomous block.
Transaction control statements in an autonomous PL/SQL block apply only to the currently active autonomous transaction. Examples of such statements are:
SET TRANSACTION COMMIT ROLLBACK SAVEPOINT ROLLBACK TO SAVEPOINT
Similarly, transaction control statements in the main transaction apply only to that transaction and not to any autonomous transaction that it calls. For example, rolling back the main transaction to a savepoint taken before the beginning of an autonomous transaction does not roll back the autonomous transaction.
|
 Copyright © 1996, 2002 Oracle Corporation. All Rights Reserved. |
|