19
DBMS_REFRESH

"ADD Procedure"

Adds materialized views to a refresh group.

"CHANGE Procedure"

Changes the refresh interval for a refresh group.

"DESTROY Procedure"

Removes all of the materialized views from a refresh group and deletes the refresh group.

"MAKE Procedure"

Specifies the members of a refresh group and the time interval used to determine when the members of this group should be refreshed.

"REFRESH Procedure"

Manually refreshes a refresh group.

"SUBTRACT Procedure"

Removes materialized views from a refresh group.

name

Name of the refresh group to which you want to add members.

list

Comma-separated list of materialized views that you want to add to the refresh group. (Synonyms are not supported.)

tab

Instead of a comma-separated list, you can supply a PL/SQL index-by table of type DBMS_UTILITY.UNCL_ARRAY, where each element is the name of a materialized view. The first materialized view should be in position 1. The last position must be NULL.

lax

A materialized view can belong to only one refresh group at a time. If you are moving a materialized view from one group to another, then you must set the lax flag to true to succeed. Oracle then automatically removes the materialized view from the other refresh group and updates its refresh interval to be that of its new group. Otherwise, the call to ADD generates an error message.

name

Name of the refresh group for which you want to alter the refresh interval.

next_date

Next date that you want a refresh to occur. By default, this date remains unchanged.

interval

Function used to calculate the next time to refresh the materialized views in the refresh group. This interval is evaluated immediately before the refresh. Thus, you should select an interval that is greater than the time it takes to perform a refresh. By default, the interval remains unchanged.

implicit_destroy

Allows you to reset the value of the implicit_destroy flag. If this flag is set, then Oracle automatically deletes the group if it no longer contains any members. By default, this flag remains unchanged.

rollback_seg

Allows you to change the rollback segment used. By default, the rollback segment remains unchanged. To reset this parameter to use the default rollback segment, specify NULL, including the quotes. Specifying NULL without quotes indicates that you do not want to change the rollback segment currently being used.

push_deferred_rpc

Used by updatable materialized views only. Set this parameter to true if you want to push changes from the materialized view to its associated master table or master materialized view before refreshing the materialized view. Otherwise, these changes may appear to be temporarily lost. By default, this flag remains unchanged.

refresh_after_errors

Used by updatable materialized views only. Set this parameter to true if you want the refresh to proceed even if there are outstanding conflicts logged in the DEFERROR view for the materialized view's master table or master materialized view. By default, this flag remains unchanged.

purge_option

If you are using the parallel propagation mechanism (that is, parallelism is set to 1 or greater), then:

• 0 = do not purge
• 1 = lazy (default)
• 2 = aggressive

In most cases, lazy purge is the optimal setting. Set purge to aggressive to trim back the queue if multiple master replication groups are pushed to different target sites, and updates to one or more replication groups are infrequent and infrequently pushed. If all replication groups are infrequently updated and pushed, then set purge to do not purge and occasionally execute PUSH with purge set to aggressive to reduce the queue.

parallelism

0 specifies serial propagation.

n > 1 specifies parallel propagation with n parallel processes.

1 specifies parallel propagation using only one parallel process.

heap_size

Maximum number of transactions to be examined simultaneously for parallel propagation scheduling. Oracle automatically calculates the default setting for optimal performance.

Note: Do not set this parameter unless directed to do so by Oracle Support Services.

name

Name of the refresh group that you want to destroy.

name

Unique name used to identify the refresh group. Refresh groups must follow the same naming conventions as tables.

list

Comma-separated list of materialized views that you want to refresh. (Synonyms are not supported.) These materialized views can be located in different schemas and have different master tables or master materialized views. However, all of the listed materialized views must be in your current database.

tab

Instead of a comma separated list, you can supply a PL/SQL index-by table of names of materialized views that you want to refresh using the datatype DBMS_UTILITY.UNCL_ARRAY. If the table contains the names of n materialized views, then the first materialized view should be in position 1 and the n + 1 position should be set to NULL.

next_date

Next date that you want a refresh to occur.

interval

Function used to calculate the next time to refresh the materialized views in the group. This field is used with the next_date value.

For example, if you specify NEXT_DAY(SYSDATE+1, "MONDAY") as your interval, and if your next_date evaluates to Monday, then Oracle refreshes the materialized views every Monday. This interval is evaluated immediately before the refresh. Thus, you should select an interval that is greater than the time it takes to perform a refresh.

implicit_destroy

Set this to true if you want to delete the refresh group automatically when it no longer contains any members. Oracle checks this flag only when you call the SUBTRACT procedure. That is, setting this flag still enables you to create an empty refresh group.

lax

A materialized view can belong to only one refresh group at a time. If you are moving a materialized view from an existing group to a new refresh group, then you must set this to true to succeed. Oracle then automatically removes the materialized view from the other refresh group and updates its refresh interval to be that of its new group. Otherwise, the call to MAKE generates an error message.

job

Needed by the Import utility. Use the default value, 0.

rollback_seg

Name of the rollback segment to use while refreshing materialized views. The default, NULL, uses the default rollback segment.

push_deferred_rpc

Used by updatable materialized views only. Use the default value, true, if you want to push changes from the materialized view to its associated master table or master materialized view before refreshing the materialized view. Otherwise, these changes may appear to be temporarily lost.

refresh_after_errors

Used by updatable materialized views only. Set this to 0 if you want the refresh to proceed even if there are outstanding conflicts logged in the DEFERROR view for the materialized view's master table or master materialized view.

purge_option

If you are using the parallel propagation mechanism (in other words, parallelism is set to 1 or greater), then 0 = do not purge; 1 = lazy (default); 2 = aggressive. In most cases, lazy purge is the optimal setting.

Set purge to aggressive to trim back the queue if multiple master replication groups are pushed to different target sites, and updates to one or more replication groups are infrequent and infrequently pushed. If all replication groups are infrequently updated and pushed, then set purge to do not purge and occasionally execute PUSH with purge set to aggressive to reduce the queue.

parallelism

0 specifies serial propagation.

n > 1 specifies parallel propagation with n parallel processes.

1 specifies parallel propagation using only one parallel process.

heap_size

Maximum number of transactions to be examined simultaneously for parallel propagation scheduling. Oracle automatically calculates the default setting for optimal performance.

Note: Do not set this parameter unless directed to do so by Oracle Support Services.

name

Name of the refresh group that you want to refresh manually.

name

Name of the refresh group from which you want to remove members.

list

Comma-separated list of materialized views that you want to remove from the refresh group. (Synonyms are not supported.) These materialized views can be located in different schemas and have different master tables or master materialized views. However, all of the listed materialized views must be in your current database.

tab

Instead of a comma-separated list, you can supply a PL/SQL index-by table of names of materialized views that you want to refresh using the datatype DBMS_UTILITY.UNCL_ARRAY. If the table contains the names of n materialized views, then the first materialized view should be in position 1 and the n  + 1 position should be set to NULL.

lax

Set this to false if you want Oracle to generate an error message if the materialized view you are attempting to remove is not a member of the refresh group.